Make sure this part fits

GM 25768321
Lower Control Arm, Rear Passenger Side

2004-2009 Cadillac SRX

Customer Questions & Expert Answers (12)
GM 25768321 Lower Control Arm, Rear Passenger Side
GM 25768321 Lower Control Arm, Rear Passenger Side
  • Part Description
    Arm, Rear Axle Control Arm
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25768321 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25768321 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the order of installation for the upper control arm for the 2009 Cadillac SRX? Posted by Customer
    A:
    Begin by installing the upper control arm to the vehicle, followed by the upper control arm to frame mounting bolts and nuts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process for the 2009 Cadillac SRX? Posted by Customer
    A:
    Position the lower control arm on the ball stud and raise it to the cradle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the torque specification for tightening the lower control arm to cradle nuts for the 2007 Cadillac SRX? Posted by Customer
    A:
    Tighten the nuts to 135 N.m (96 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the final step in the process for the 2008 Cadillac SRX? Posted by Customer
    A:
    Connect the stabilizer shaft link to the lower control arm, install the stabilizer shaft link lower retaining nut, reinstall the tire and wheel, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after loosely installing the trailing link for the 2007 Cadillac SRX? Posted by Customer
    A:
    Raise the frame with a suitable jack and install the front bolts to the frame, tightening them to 265 N.m (195 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the final step before lowering for the 2009 Cadillac SRX? Posted by Customer
    A:
    Reinstall the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the next step after lowering the rear frame for the 2004 Cadillac SRX? Posted by Customer
    A:
    Remove the trailing link to frame nut and bolt, and take the trailing link out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What are the torque specifications for the new upper control arm to frame bolts and nuts for the 2004 Cadillac SRX? Posted by Customer
    A:
    Bolts to 150 Nm (111 ft. lbs.) and nuts to 50 Nm (111 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the torque specifications for tightening the trailing link to frame nut and the trailing link to knuckle mounting bolt for the 2006 Cadillac SRX? Posted by Customer
    A:
    Tighten the trailing link to frame nut to 150 Nm (111 ft. lbs.) and the trailing link to knuckle mounting bolt to 170 Nm (125 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be done after removing the jack for the 2008 Cadillac SRX? Posted by Customer
    A:
    Support the frame with a suitable jack and remove the front bolts from the frame.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step to replace the lower control arm for the 2006 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Control Arm, Rear Passenger Side 25768321 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25768321 Lower Control Arm, Rear Passenger Side is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25768321 Lower Control Arm, Rear Passenger Side fits certain Cadillac SRX models.
The original GM component designated by manufacturer part number 25768321 maintains top performance when functioning as the Arm, Rear Axle Control Arm unit at its Rear Passenger Side. The component 25768321 is constructed from durable material and its dimensions span 21.3 x 10.6 x 5.5 inches while weighing 3.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Control Arm. The part 25768321 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.