How to replace the trailing arm on Cadillac SRX?

First, lift and support the vehicle, then pull off the tire and wheel to replace the Trailing Arm. Unshack the brake pipe bracket link from the upper Control Arm, then the brake pipe bracket retaining nuts, and finally install the brake pipe bracket to the mounting studs. Place the side of the lower Control Arm on a jack support point that is suitable, then release the trailing link to knuckle nut and bolt. Dislodge the jack and support the frame with suitable jack and dissect the front bolts of the frame bottoming out the front of rear frame. After that, remove the trailing link to frame nut and bolt and pull off the trailing link from the vehicle. Care should be taken to ensure that during installation, while reinstalling the trailing link back onto the vehicle it should be loosely installed, only then to be securely tightened. Mount the trailing link to frame bolt and nut and raise the frame with a suitable jack. Replace the front bolts to the frame and tighten them until they reach 265 nm (195 ft. Lbs.). Will remove the jack and support it for the lower Control Arm using an apt jack to be aligned with the trailing link and knuckle. The trailing link to knuckle bolt and nut is installed by tightening the trailing link to the frame nut to 150 nm (111 ft. Lbs.), and the trailing link to knuckle nut to 170 nm (125 ft. Lbs.). Reconnect the brake pipe bracket putting back on the mounting studs and secure the brake pipe bracket retaining nuts, turning them to 10 nm (89 inch lbs), install the automatic level control link to the top control and the final stage being the tire and wheel then lower the vehicle.

OEM Cadillac SRX Trailing Arm

Trailing Control Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Trailing Arms found

View related parts
Cadillac SRX Lower Control Arm, Rear Driver Side
Part Number: 15853188
$250.72 MSRP: $398.08
You Save: $147.36 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Lower Control Arm, Rear Passenger Side
Part Number: 15853187
$250.72 MSRP: $398.08
You Save: $147.36 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Cadillac SRX | Base, Luxury, Performance, Premium | 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Cadillac SRX Upper Control Arm, Rear Passenger Side
Part Number: 15267620
$124.73 MSRP: $198.03
You Save: $73.30 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Passenger Side
- Replaces: 25766118
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Upper Control Arm, Rear Driver Side
Part Number: 15267619
$128.23 MSRP: $199.96
You Save: $71.73 (36%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Suspension Control Arm and Ball Joint Assembly; Control Arm Assembly; Control Arm
- Position: Rear Driver Side
- Replaces: 25766117
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Lower Control Arm, Rear Passenger Side
Part Number: 25768321
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Lower Control Arm, Rear Driver Side
Part Number: 25768320
Product Specifications
- Other Name: Arm, Rear Axle Control Arm; Control Arm
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Trailing Arm, Rear Passenger Side
Part Number: 25721399
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
Cadillac SRX Trailing Arm, Rear Driver Side
Part Number: 25716358
Product Specifications
- Other Name: Arm, Rear Suspension Trailing; Arm, Rear Axle Control Arm
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2009 Cadillac SRX | Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

Cadillac SRX Trailing Arm

Our website offers an extensive catalog of genuine Cadillac SRX Trailing Arm at unbeatable prices. Every OEM Cadillac SRX Trailing Arm comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac SRX Trailing Arm Parts Questions & Experts Answers

Upper Control Arm, Rear Passenger Side
15267620
Q: How to replace the trailing arm on Cadillac SRX?
A: First, lift and support the vehicle, then pull off the tire and wheel to replace the Trailing Arm. Unshack the brake pipe bracket link from the upper Control Arm, then the brake pipe bracket retaining nuts, and finally install the brake pipe bracket to the mounting studs. Place the side of the lower Control Arm on a jack support point that is suitable, then release the trailing link to knuckle nut and bolt. Dislodge the jack and support the frame with suitable jack and dissect the front bolts of the frame bottoming out the front of rear frame. After that, remove the trailing link to frame nut and bolt and pull off the trailing link from the vehicle. Care should be taken to ensure that during installation, while reinstalling the trailing link back onto the vehicle it should be loosely installed, only then to be securely tightened. Mount the trailing link to frame bolt and nut and raise the frame with a suitable jack. Replace the front bolts to the frame and tighten them until they reach 265 nm (195 ft. Lbs.). Will remove the jack and support it for the lower Control Arm using an apt jack to be aligned with the trailing link and knuckle. The trailing link to knuckle bolt and nut is installed by tightening the trailing link to the frame nut to 150 nm (111 ft. Lbs.), and the trailing link to knuckle nut to 170 nm (125 ft. Lbs.). Reconnect the brake pipe bracket putting back on the mounting studs and secure the brake pipe bracket retaining nuts, turning them to 10 nm (89 inch lbs), install the automatic level control link to the top control and the final stage being the tire and wheel then lower the vehicle.

Related Cadillac SRX Parts

Browse Cadillac SRX Trailing Arm by Years

2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004