Make sure this part fits

GM 25721399
Trailing Arm, Rear Passenger Side

2004-2009 GM

Customer Questions & Expert Answers (24)
GM 25721399 Trailing Arm, Rear Passenger Side
  • Part Description
    Arm, Rear Suspension Trailing
  • Position
    Rear Passenger Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008 Cadillac CTSBase6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2006-2009 Cadillac STSV8 Cyl 4.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 25721399 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 25721399 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be removed after the tire and wheel for the 2008 Cadillac CTS? Posted by Customer
    A:
    Next, take off the brake caliper mounting bracket and the shock absorber.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after installing the front mounting bolts for the 2008 Cadillac CTS? Posted by Customer
    A:
    Install the rear trailing arm nut and bolt, tightening the trailing arm bolt to 170 N.m (125 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How should the new lower control arm be installed for the 2008 Cadillac CTS? Posted by Customer
    A:
    Position it and install the cradle bolts, tightening them at normal vehicle ride height.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after loosely installing the fasteners for the 2004 Cadillac SRX? Posted by Customer
    A:
    Install the upper control arm to frame mounting bolts and nuts, followed by connecting the upper control arm to the knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the lower control arm for the 2009 Cadillac SRX? Posted by Customer
    A:
    Lower the control arm at the frame while moving the ball stud upwards.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step to replace the trailing arm for the 2007 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How should the lower control arm be supported for the 2008 Cadillac SRX? Posted by Customer
    A:
    With a suitable jack.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What should be installed after the trailing link for the 2006 Cadillac SRX? Posted by Customer
    A:
    Install the trailing link to frame bolt and nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How do you remove the lower control arm for the 2006 Cadillac STS? Posted by Customer
    A:
    Lower the control arm at the frame while moving the ball stud upwards.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What needs to be disconnected from the lower control arm for the 2006 Cadillac SRX? Posted by Customer
    A:
    The ABS wire harness.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the next step after lowering the frame for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the trailing link to frame nut and bolt, then take the trailing link out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step to replace the trailing arm for the 2004 Cadillac SRX? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    How do you separate the lower control arm from the steering knuckle for the 2007 Cadillac SRX? Posted by Customer
    A:
    Use the Ball Joint Remover (J 43631) to separate the lower control arm from the steering knuckle, raising the power steering gear for clearance as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    How do you remove the lower control arm for the 2008 Cadillac STS? Posted by Customer
    A:
    Remove the lower control arm to cradle nuts and bolts, then take out the lower control arm from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What is the first step in the installation process for the 2007 Cadillac STS? Posted by Customer
    A:
    Loosely install the trailing link to the vehicle, followed by the trailing link to frame bolt and nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the torque specification for the upper control arm to frame bolts for the 2009 Cadillac SRX? Posted by Customer
    A:
    Tighten the new upper control arm to frame bolts to 120 Nm (89 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What needs to be removed next for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the trailing link to knuckle nut and bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the first step to replace the upper control arm for the 2006 Cadillac STS? Posted by Customer
    A:
    First, raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be removed after taking off the tire and wheel for the 2009 Cadillac STS? Posted by Customer
    A:
    Remove the air deflector and the stabilizer shaft link lower nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What should be done after loosely installing the trailing link for the 2009 Cadillac SRX? Posted by Customer
    A:
    Raise the frame with a suitable jack, ensuring to follow fastener caution guidelines.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the next step after removing the lower control arm for the 2008 Cadillac SRX? Posted by Customer
    A:
    Install the new lower control arm to the vehicle, ensuring all fasteners are loosely installed before tightening.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    Q:
    What are the torque specifications for the trailing link to frame nut and the trailing link to knuckle mounting bolt for the 2006 Cadillac STS? Posted by Customer
    A:
    Tighten the trailing link to frame nut to 150 Nm (111 ft. lbs.) and the trailing link to knuckle mounting bolt to 170 Nm (125 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Trailing Arm
    Q:
    What is the torque specification for the shock module yoke to the lower control arm nut for the 2007 Cadillac STS? Posted by Customer
    A:
    Tighten it to 180 N.m (133 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Control Arm
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Trailing Arm, Rear Passenger Side 25721399 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 25721399 Trailing Arm, Rear Passenger Side is available in the market under the name GM Control Arm, Trailing Arm. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 25721399 Trailing Arm, Rear Passenger Side fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 25721399 maintains top performance when functioning as the Arm, Rear Suspension Trailing unit at its Rear Passenger Side. The component 25721399 is constructed from durable material and its dimensions span 23.9 x 2.8 x 2.7 inches while weighing 4.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Arm, Rear Axle Control Arm. The part 25721399 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.