How to Replace Coil Springs on 2009 Cadillac SRX?

Start by raising and supporting the vehicle before replacing the coil spring. Begin by removing the tire followed by disconnecting both the automatic level control sensor link and the head lamp adjustment link from the upper Control Arm. Begin by elevating the lower Control Arm with a suitable jack then remove the shock absorber bolt attached to the lower mounting. Before executing the operation install a suitable jack beneath the rear frame. Then lower the Control Arm before removing its support. Start by removing the side frame bolts on the coil spring replacement area followed by the frame to body side mounting bolts and washers. Lower the frame enough to take out the coil spring without touching the guide pins. Install your new coil spring then elevatethe frame before performing the next steps. Fitting the frame to body mounting bolts and washers requires torque of 265 nm (195 lb ft) for front bolts and 191 nm (140 lb ft) for rear bolts. Insert an appropriate jack under the Control Arm until the shock absorber matches the knuckle position. After first installing the shock absorber lower retaining bolt at 150 nm (111 lb ft) use a torque wrench to tighten it. Remove the jack once completing the bolt installation. Following upper Control Arm installation connect the head lamp adjustment link and the automatic level control sensor link to their respective slots then mount the tire assembly and drop the car down.

OEM 2009 Cadillac SRX Coil Springs

Strut Spring

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Coil Springs found

View related parts
2009 Cadillac SRX Coil Spring, Front
Part Number: 25810851
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Replaces: 15797105, 25816759, 25750158, 15868835
- Item Weight: 8.60 Pounds
- Item Dimensions: 11.4 x 5.3 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25810851
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Coil Spring, Front
Part Number: 25810849
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs; Spring
- Position: Front
- Item Weight: 6.40 Pounds
- Item Dimensions: 10.9 x 5.1 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25810849
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Spring, Front
Part Number: 25810850
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 6.30 Pounds
- Item Dimensions: 11.0 x 5.3 x 5.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25810850
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Coil Spring, Front
Part Number: 25810848
Product Specifications
- Other Name: Spring, Front Chassis; Coil Springs
- Position: Front
- Item Weight: 6.80 Pounds
- Item Dimensions: 11.2 x 5.1 x 5.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25810848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Coil Spring, Rear
Part Number: 10356529
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs; Spring
- Position: Rear
- Item Weight: 10.10 Pounds
- Item Dimensions: 23.1 x 6.8 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10356529
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
View related parts
2009 Cadillac SRX Spring, Rear
Part Number: 10356530
Product Specifications
- Other Name: Spring, Rear Spring; Coil Springs
- Position: Rear
- Item Weight: 10.70 Pounds
- Item Dimensions: 17.3 x 6.4 x 6.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 10356530
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Cadillac SRX Submodels:
- Base | 6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS

2009 Cadillac SRX Coil Springs

With a comprehensive array of OEM 2009 Cadillac SRX Coil Springs, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Cadillac SRX Coil Springs are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Cadillac SRX Parts Questions & Experts Answers

Q: How to Replace Coil Springs on 2009 Cadillac SRX?
A: Start by raising and supporting the vehicle before replacing the coil spring. Begin by removing the tire followed by disconnecting both the automatic level control sensor link and the head lamp adjustment link from the upper Control Arm. Begin by elevating the lower Control Arm with a suitable jack then remove the shock absorber bolt attached to the lower mounting. Before executing the operation install a suitable jack beneath the rear frame. Then lower the Control Arm before removing its support. Start by removing the side frame bolts on the coil spring replacement area followed by the frame to body side mounting bolts and washers. Lower the frame enough to take out the coil spring without touching the guide pins. Install your new coil spring then elevatethe frame before performing the next steps. Fitting the frame to body mounting bolts and washers requires torque of 265 nm (195 lb ft) for front bolts and 191 nm (140 lb ft) for rear bolts. Insert an appropriate jack under the Control Arm until the shock absorber matches the knuckle position. After first installing the shock absorber lower retaining bolt at 150 nm (111 lb ft) use a torque wrench to tighten it. Remove the jack once completing the bolt installation. Following upper Control Arm installation connect the head lamp adjustment link and the automatic level control sensor link to their respective slots then mount the tire assembly and drop the car down.