Make sure this part fits

GM 88951999
Knuckle

2003-2011 GM

Customer Questions & Expert Answers (16)
GM 88951999 Knuckle
  • Part Description
    Knuckle, Rear Suspension
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2003-2007 Cadillac CTSBase, Luxury, Luxury Sport, V6 Cyl 2.8 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS, 8 Cyl 4.6 L GAS
    2005-2011 Cadillac STSBase, Platinum, V6 Cyl 3.6 L GAS, 8 Cyl 4.4 L GAS, 8 Cyl 4.6 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88951999 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88951999 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the steering knuckle in the rear suspension for the 2006 Cadillac CTS? Posted by Customer
    A:
    Begin by raising and supporting the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be done to the upper control arm for the 2003 Cadillac CTS? Posted by Customer
    A:
    Remove the upper control arm to steering knuckle pinch bolt and separate the upper control arm from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you secure the upper control arm to the steering knuckle for the 2007 Cadillac CTS? Posted by Customer
    A:
    Install the upper control arm to the steering knuckle and secure it with the pinch bolt and nut, tightening the nut to 60 N.m (44 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What are the final steps after connecting the outer tie rod for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the wheel bearing/hub, followed by the tire and wheel, and lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you separate the upper control arm from the steering knuckle for the 2005 Cadillac CTS? Posted by Customer
    A:
    Remove the upper control arm to steering knuckle pinch bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be done after removing the jack for the 2006 Cadillac SRX? Posted by Customer
    A:
    Connect the ABS sensor electrical connector to the backing plate and the ABS sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the first step in the installation process for the 2007 Cadillac STS? Posted by Customer
    A:
    Attach the steering knuckle to the lower control arm ball stud and secure it with a new retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the next step after detaching the upper control arm ball stud for the 2009 Cadillac STS? Posted by Customer
    A:
    Detach the lower control arm ball stud from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the first step in the installation process for the 2004 Cadillac SRX? Posted by Customer
    A:
    Attach the steering knuckle to the lower control arm ball stud and install a new lower control arm ball stud retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the final step after installing the tire and wheel for the 2008 Cadillac STS? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be removed after raising for the 2008 Cadillac SRX? Posted by Customer
    A:
    Remove the tire and wheel, followed by the wheel bearing/hub.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    How do you install the new steering knuckle for the 2005 Cadillac STS? Posted by Customer
    A:
    Attach the new steering knuckle to the lower control arm ball stud and secure it with a new retaining nut.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the next step after removing the brake hose bracket for the 2007 Cadillac SRX? Posted by Customer
    A:
    Remove the upper control arm ball stud to steering knuckle retaining nut and separate the upper control arm ball stud from the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What is the final step in removing the steering knuckle for the 2009 Cadillac SRX? Posted by Customer
    A:
    Remove the steering knuckle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    Q:
    What should be done after securing the lower control arm ball stud for the 2006 Cadillac STS? Posted by Customer
    A:
    Repeat the process for the upper control arm ball stud, ensuring to install a new retaining nut and tighten it similarly.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Knuckle 88951999 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88951999 Knuckle is available in the market under the name GM Steering Knuckle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88951999 Knuckle fits certain Cadillac CTS, SRX, STS models.
The original GM component designated by manufacturer part number 88951999 maintains top performance when functioning as the Knuckle, Rear Suspension unit at its Rear. The component 88951999 is constructed from durable material and its dimensions span 14.5 x 10.7 x 6.5 inches while weighing 9.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Knuckle, Rear Wheel. The part 88951999 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.