The first procedure when replacing the generator bracket on the ly7 - gas, 6 cyl, 3.6l, sfi, v6, alum requires turning off the ignition and removing the generator. Start by removing the coolnent inlet pipe lower bolt that secures the generator bracket which needs to be followed by belt tensioner removal. First disconnect the generator bracket bolts followed by removal of the generator bracket. The first step for installation is to mount the generator bracket followed by strict attention to the fastener notice. The generator bracket installation requires first tightening bolt numbers (1, 2) to 50 n.m (37 lb ft) followed by bolt number (3) to 23 n.m (17 lb ft). Complete the installation by placing back the belt tensioner after which you can set the generator bracket bolt for the coolant inlet pipe and install the generator itself.