OEM Cadillac XLR Washer Reservoir

Cadillac XLR Washer Reservoir Parts Questions & Experts Answers

• Washer Reservoir
  19256783
  Q: How to Service and Repair the Washer Reservoir on Cadillac XLR?

  A: Start your task by entering the hood area to detach the plastic retainer securing the washer solvent container filler tube at the top next to the master cylinder. Place the vehicle on jack stands then position the lift so it stays away from the fender to the left of the vehicle front. Move the left front wheel and hang the left front lower wheelhouse splash shield from its fasteners (1 2 3) without disturbing the fender alignment. Let the machine Washer Pump output tube empty its contents into an acceptable receptacle. You should slide the lock before disconnecting the electrical cables and headlamp washer output hose. Pull out the washer solvent container through the installed fender after loosening its bolts (1, 2). After installing the washer pumps and level sensor at their new container position place the container on mount and fasten mounting bolts until they reach 11 n.m (97 lb in). Reattach the Washer Pump electrical connections and level sensor electrical wires, then join the Washer Pump hose and headlamp washer output hose while securing the slide-lock hose clamp correctly. Insert the front wheel and lower the vehicle as you put back the left front lower wheel shield and its three fasteners. Fill the washer solvent container after putting a new plastic tube retainer on the filler. Test the Washer Pump for both the headlamps and windscreen plus the sensor level and warning light functionality.