OEM Cadillac XLR Washer Pump

Cadillac XLR Washer Pump Parts Questions & Experts Answers

• Washer Pump
  12335752
  Q: How to Service and Repair the Washer Pump on Cadillac XLR?

  A: The replacement process for a headlamp Washer Pump requires first elevating and steadying the vehicle with adequate space between it and the left front fender. Ordinarily detach and document the left front wheel position before you take out the left front lower wheelhouse splash shield fasteners from their position behind the wheelhouse (1, 2, 3). Remember the fender alignment reference for reinstallation. The installation process starts with draining fluid from the lower mounted windshield Washer Pump output hose by disconnecting it before removing the headlamp Washer Pump output hose after sliding out the lock and removing it from the assembly. First remove the electrical connector of the headlamp Washer Pump then turn the Washer Pump counterclockwise to extract it from the washer solvent container. The installer must wet the headlamp Washer Pump body rubber grommet before pushing the pump through the grommet until the pump reaches its original position. To install the headlight Washer Pump electric connection you must attach it to the pump before hooking up the output hose to the pump and locking in place using the sliding connection mechanism. Connect the lower windshield Washer Pump output hose while lowering the vehicle then reposition the washer solvent to its original level. Check washer pumps along with sensor leaks when aligning the fender and installing fasteners (1, 2, 3) to the left front lower wheelhouse splash shield beforeinstallationof the left front wheel.