OEM Chevrolet Avalanche 2500 Steering Angle Sensor

Chevrolet Avalanche 2500 Steering Angle Sensor Parts Questions & Experts Answers

• Position Sensor
  26104070
  Q: How to service and repair the Steering Angle Sensor on Chevrolet Avalanche 2500?

  A: Service and repair of the Steering Wheel Position Sensor requires identification of the steering angle sensor model from provided images followed by proper removal steps. The sensor connector's FRONT component faces the right side. Existing sensor reuse eliminates the need for centering before removal. Use a torque screwdriver to disconnect the sensor connector followed by sensor removal from its position within the adapter and bearing assembly. Creating an alignment mark on the flush rotor flange cuff before sensor reinstallation will prevent misalignment when reusing existing hardware. A foam ring and centering pin hole along with a flush rotor flange cuff will appear on the sensor's FRONT side. Installation requires sensor alignment with the steering shaft while placing it within the adapter and bearing assembly together with proper attachment of the connector. The installation of newly acquired sensors includes a preinstalled pin. Keep the pin in place until the sensor has reached full installation position. Multiple D flat surfaces, an alignment tab, and a foam ring can be found on the sensor's back side. The rotor flange cuff alignment marks need to remain correctly positioned until the sensor gets fully installed in position. Follow the same installation process for every additional sensor then document each sensory feature including pin positions and alignment points.