Make sure this part fits

GM 26091590
Position Sensor

2002-2004 GM

Customer Questions & Expert Answers (4)
GM 26091590 Position Sensor
  • Part Description
    Sensor Kit, Steering; Steering Wheel Speed Sensor
  • Position
    Rear
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002 Chevrolet Avalanche 1500Base, North Face, On Road Edition, Z718 Cyl 5.3 L GAS
    2002 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2002-2004 Chevrolet Silverado 1500Base, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2002-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2002 Chevrolet Suburban 1500LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26091590 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26091590 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the rear Steering Angle Sensor on GMC Sierra 1500? Posted by Customer
    A:
    Introduction starts with sensor replacement for the rear position sensor by elevating the vehicle in position. The electrical connector needs disconnection when removing the steering gear protection shield retaining bolts . The rear wheel position sensor cover needs to be removed from around the steering gear while protecting the rear position sensor from damage. Then loosen the bolts which retain the position sensor while inspecting the inner tie rod boot for signs of damage. Steering gear actuators need replacing if they become damaged. First maintain the sensor position without rotating it before taking the rear wheel position sensor out of the steering gear. Installation requires O-ring installation followed by rear wheel position sensor attachment to the steering gear with exact placement of the new sensor. Right away install the pin that retains the standard sensor position after removing it. Put rear wheel position sensor retaining bolts in position while using LOCTITE 242 blue fluid and torque them to 4 Nm (35 inch lbs.). Install the rear wheel position sensor cover and secure the electrical connector before installing the steering gear protection shield . Tighten all retaining bolts to 180 Nm (132 ft. lbs.). After setting the vehicle height use the four-wheel alignment equipment to calibrate all wheels.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the final step after completing the installation for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reconnect the negative battery cable and enable the SIR system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Angle Sensor
    Q:
    How should the position sensor connector be pulled for better access for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Pull it down around the right side of the steering column, ensuring not to apply sideways force to the sensor and bearing.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Steering Angle Sensor
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Position Sensor 26091590 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26091590 Position Sensor is available in the market under the name GM Steering Angle Sensor. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26091590 Position Sensor fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT models.
The original GM component designated by manufacturer part number 26091590 maintains top performance when functioning as the Sensor Kit, Steering; Steering Wheel Speed Sensor unit at its Rear. The component 26091590 is constructed from durable material and its dimensions span 5.3 x 5.3 x 7.7 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Sensor. The part 26091590 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.