Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
Position: Front Driver Side
Replaces: 88981018
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
Other Name: Motor Kit, Front Side Door Window Regulator; Motor Kit, Door And End Gate Electrical; Motor Kit, Front Door Window Regulator; Motor Kit, Rear Door Window Regulator
Position: Front Passenger Side
Replaces: 88981019
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2006 Chevrolet Avalanche 2500 | Base, LS, LT | 8 Cyl 8.1 L GAS
Other Name: Motor Assembly, Rear Side Door Window Regulator-Left-Hand; Motor; Motor, Door And End Gate Electrical
Position: Rear Driver Side
Replaced by: 19208468
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2004 Chevrolet Avalanche 2500 | Base | 8 Cyl 8.1 L GAS
Chevrolet Avalanche 2500 Window Motor
Our website offers an extensive catalog of genuine Chevrolet Avalanche 2500 Window Motor at unbeatable prices. Every OEM Chevrolet Avalanche 2500 Window Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Avalanche 2500 Window Motor Parts Questions & Experts Answers
Q: How to service the rear door window motor on Chevrolet Avalanche 2500?
A: The service procedure starts by lifting the window until completion then continues to the motor maintenance when windows have mandatory extraction to expose retaining screws. You should start by taking out the door trim panel followed by the water deflector and door speaker before applying support to the window. Connect the wiring harness from the Window Regulator motor before removing its three bolts (115 202 01) noting that the cable gear must stay within the housing to prevent the cable from detaching from the spool. After wiggling the Window Motor away from the cable housing maintain careful note of its orientation and then pull it out from the Window Regulator assembly. Install the motor onto the housing of the cable by gently wiggling it in place then put in the bolts (115 202 01) followed by tightening them to 5 n.m (44 lb in). Reinstall the window after which you should connect the wiring harness to the Window Regulator motor and eliminate the support from the window. Connect the wire connector to the switch to test the window operation and then reinstall the speaker and water deflector together with the door trim panel.