How to replace the A/C Accumulator on Chevrolet Blazer?

To replace the accumulator, you should recover the refrigerant first. You need to remove the evaporator tube nut and the steam evaporators. Then remove the nut from the evaporator tube and disconnect the electrical connector from the a/c low pressure switch. Unscrew the compressor hose nut off the accumulator and then compressor hose. Then remove the nut (from the evaporator fitting) and the accumulative bracket nut (from retaining stud) before getting rid of the accumulator. Remove o-ring seals, bolt and retaining bracket from the accumulator. For the installation, you should install new o-ring seals, and if you replace the accumulator, add refrigerant oil to the condenser. Mount the retaining bracket onto the accumulator, fasten it with the retaining bracket bolt and tighten it with the torque of 10 n.m (89 lb in). Wrench the accumulator and accelerator bracket nut with a torque of 9 n.m (80 lb in). Next, install the nut to the evaporator fitting, tighten it 16 nm (12 lb ft), the compressor hose to the accumulator and again the compressor hose nut, tighten that to 16 n.m (12 lb ft). Reconnect the electric connector to the a/c low pressure switch and fasten the nut of the evaporator tube to 25 n.m (18 lb ft). Lastly, install the evaporator tube to the evaporator and the evaporator tube nut and tighten to 16n.m (12 lb ft). Evacuate and recharge the system, and conduct a leak test on the fittings with the halogen leak detector (J 39400-A).

OEM Chevrolet Blazer A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 A/C Accumulators found

View related parts
Chevrolet Blazer Dehydrator
Part Number: 2724877
$30.89 MSRP: $57.99
You Save: $27.10 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator, Dehydrator; A/C Receiver Drier; A/C Accumulator; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1987-1991 Chevrolet Blazer | Custom Deluxe, Scottsdale, Silverado | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet Blazer Dehydrator
Part Number: 89038598
$37.82 MSRP: $77.72
You Save: $39.90 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Accumulator, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator; Accumulator, A/C Refrigerant
- Replaces: 02724945, 2724845, 2724945
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Dehydrator
Part Number: 2724818
$30.66 MSRP: $57.58
You Save: $26.92 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Blazer | Base, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Dehydrator
Part Number: 2724691
$36.68 MSRP: $71.07
You Save: $34.39 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly-A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1993 Chevrolet Blazer | Cheyenne, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Blazer Dehydrator
Part Number: 84473270
$76.45 MSRP: $157.10
You Save: $80.65 (52%)
ADD TO CART
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Receiver & Dehydrato, A/C Refrigerant
- Replaced by: 86515463
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2021 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Drier Dessicant Bag
Part Number: 84377853
$102.94 MSRP: $211.51
You Save: $108.57 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Dehydrator; Drier; Receiver & Dehydrato, A/C Refrigerant
- Replaced by: 42858352
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2024 Chevrolet Blazer | LT, Premier, RS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Blazer A/C Accumulator

Our website offers an extensive catalog of genuine Chevrolet Blazer A/C Accumulator at unbeatable prices. Every OEM Chevrolet Blazer A/C Accumulator comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer A/C Accumulator Parts Questions & Experts Answers

Dehydrator
89038598
Q: How to replace the A/C Accumulator on Chevrolet Blazer?
A: To replace the accumulator, you should recover the refrigerant first. You need to remove the evaporator tube nut and the steam evaporators. Then remove the nut from the evaporator tube and disconnect the electrical connector from the a/c low pressure switch. Unscrew the compressor hose nut off the accumulator and then compressor hose. Then remove the nut (from the evaporator fitting) and the accumulative bracket nut (from retaining stud) before getting rid of the accumulator. Remove o-ring seals, bolt and retaining bracket from the accumulator. For the installation, you should install new o-ring seals, and if you replace the accumulator, add refrigerant oil to the condenser. Mount the retaining bracket onto the accumulator, fasten it with the retaining bracket bolt and tighten it with the torque of 10 n.m (89 lb in). Wrench the accumulator and accelerator bracket nut with a torque of 9 n.m (80 lb in). Next, install the nut to the evaporator fitting, tighten it 16 nm (12 lb ft), the compressor hose to the accumulator and again the compressor hose nut, tighten that to 16 n.m (12 lb ft). Reconnect the electric connector to the a/c low pressure switch and fasten the nut of the evaporator tube to 25 n.m (18 lb ft). Lastly, install the evaporator tube to the evaporator and the evaporator tube nut and tighten to 16n.m (12 lb ft). Evacuate and recharge the system, and conduct a leak test on the fittings with the halogen leak detector (J 39400-A).