How to service and repair the clutch disc on Chevrolet Camaro?

The first step for Clutch Disc service starts with manual transmission removal followed by clutch Pressure Plate bolt removal. Remove the clutch Pressure Plate and driven disc and extract them from the Flywheel's dowel pins. Replace the engine Flywheel and clutch Pressure Plate as one coordinated assembly during clutch driven plate replacement operations. Set the clutch Pressure Plate and driven plate onto the dowel pins of the Flywheel where the gray paint spot on the Pressure Plate matches the x on the Flywheel . Use the clutch alignment arbor (J 33169) to align the clutch driven plate to the clutch Pilot Bearing. Install the clutch Pressure Plate bolts finger tight before beginning the procedure. Apply torque of 20 nm (15 ft. Lbs.) to the clutch Pressure Plate bolts before using the torque angle meter (J 36660-A) to turn each bolt another 45°. Finally, reinstall the manual transmission.

How to Align and Install the Clutch Disc on Chevrolet Camaro?

And for servicing and repairing the Clutch Disc, the first step would be to remove the manual transmission. Then remove the clutch Pressure Plate bolts and then try to remove the clutch Pressure Plate and driven disc from the dowel pins on the Flywheel. For installation, apply the clutch alignment arbor (J33169) to align the clutch driven plate with the clutch Pilot Bearing. Mount the clutch Pressure Plate and driven plate on the dowel pins on the Flywheel , and make sure they align because the gray paint spot on the Pressure Plate is to be aimed at x on the Flywheel . Tighten clutch Pressure Plate bolts , first finger tight and subsequently to 20 nm (15 ft. Lbs.). Lastly, using the torque angle meter (J36660-A), while reattaching the clutch pressure, rotate the tension of bolts 45 degrees before fitting the manual transmission. It is worth noting that whenever changing the clutch driven plate, the truck's engine Flywheel must be replaced with the clutch Pressure Plate as a combination.

OEM Chevrolet Camaro Clutch Disc

Friction Disc

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Clutch Discs found

View related parts
Chevrolet Camaro Disc Part Number: 10235002
$117.80 MSRP: $236.66
You Save: $118.86 (51%)
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Camaro | Base | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Camaro Pressure Plate Part Number: 24278525
$866.14 MSRP: $1368.65
You Save: $502.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Clutch; Plate, Engine Clutch(Pressure Plate)
- Replaces: 24268307
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Pressure Plate Part Number: 24264315
$202.74 MSRP: $319.01
You Save: $116.27 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Clutch (Pressure Plate); Clutch Kit; Disc; Plate, Engine Clutch(Pressure Plate)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2022 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Pressure Plate Part Number: 24240679
$585.40 MSRP: $925.25
You Save: $339.85 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate Assembly-Clutch Pressure & Driven (W/Cover); Clutch Kit; Plate, Engine Clutch(Pressure Plate)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Disc Part Number: 12550237
$16.33 MSRP: $25.58
You Save: $9.25 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Pressure Plate Part Number: 12570280
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Disc
- Replaces: 12562611
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Z28, Z28 SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Disc Part Number: 12551309
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Indianapolis 500 Pace Car, Z28 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Disc Part Number: 10232736
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Disc Part Number: 10186816
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | Base, Berlinetta, LT, RS, RS Heritage Edition, Sport | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Camaro Disc Part Number: 10117771
Product Specifications
- Other Name: Plate, Engine Clutch Driven (Friction Disc); Clutch Kit; Plate, Engine Clutch Driven(Friction Disc)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984 Chevrolet Camaro | Sport | 4 Cyl 2.5 L GAS

Chevrolet Camaro Clutch Disc

Want to cut long-term maintenance and repair costs? Choose OEM Clutch Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Clutch Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro Clutch Disc Parts and Q&A

Pressure Plate
12570280
Q: How to service and repair the clutch disc on Chevrolet Camaro?
A:
The first step for Clutch Disc service starts with manual transmission removal followed by clutch Pressure Plate bolt removal. Remove the clutch Pressure Plate and driven disc and extract them from the Flywheel's dowel pins. Replace the engine Flywheel and clutch Pressure Plate as one coordinated assembly during clutch driven plate replacement operations. Set the clutch Pressure Plate and driven plate onto the dowel pins of the Flywheel where the gray paint spot on the Pressure Plate matches the x on the Flywheel . Use the clutch alignment arbor (J 33169) to align the clutch driven plate to the clutch Pilot Bearing. Install the clutch Pressure Plate bolts finger tight before beginning the procedure. Apply torque of 20 nm (15 ft. Lbs.) to the clutch Pressure Plate bolts before using the torque angle meter (J 36660-A) to turn each bolt another 45°. Finally, reinstall the manual transmission.
Disc
12550237
Q: How to Align and Install the Clutch Disc on Chevrolet Camaro?
A:
And for servicing and repairing the Clutch Disc, the first step would be to remove the manual transmission. Then remove the clutch Pressure Plate bolts and then try to remove the clutch Pressure Plate and driven disc from the dowel pins on the Flywheel. For installation, apply the clutch alignment arbor (J33169) to align the clutch driven plate with the clutch Pilot Bearing. Mount the clutch Pressure Plate and driven plate on the dowel pins on the Flywheel , and make sure they align because the gray paint spot on the Pressure Plate is to be aimed at x on the Flywheel . Tighten clutch Pressure Plate bolts , first finger tight and subsequently to 20 nm (15 ft. Lbs.). Lastly, using the torque angle meter (J36660-A), while reattaching the clutch pressure, rotate the tension of bolts 45 degrees before fitting the manual transmission. It is worth noting that whenever changing the clutch driven plate, the truck's engine Flywheel must be replaced with the clutch Pressure Plate as a combination.