How to replace the wiper motor on Chevrolet Camaro?

Firstly, you can remove the wiper arms, air inlet grille panel, and water shield in order to replace the wiper motor. Then, unscrew it and remove screw and nut, and pull out the RH linkage assembly from the LH linkage assembly using the Wiper Transmission Separator (J 39232). Then take off the linkage LH and the screw from the wiper motor and pull the wiper motor out of the bracket slots. To disconnect the RH linkage assembly from the wiper motor use the Wiper Transmission Separator (J 39232) and pull the electrical connector out of it wiper motor. For installation connect the electrical connector to the wiper motor then connect the RH linkage assembly to the wiper motor with the help of the Wiper Transmission Installer (J 39529) wile the crank arm at most should be in the innerwipe position whin the drive pin is engaged in the cam pocket. Mount the wiper motor with the 2 locator pads pushed into the bracket slots and install and apply the screw on to 10 N.m (7.5 lb ft). Mount the RH linkage assembly on the LH linkage assembly using the Wiper Transmission Installer (J 39529) and attach the LH linkage assembly with screw and nut and tighten to 10 N.m (7.5 lb ft). Lastly, install the water shield over the LH linkage assembly with the flat side underneath the windshield and finally in order air inlet grille panel and wiper arms.

OEM Chevrolet Camaro Wiper Motor

Windshield Wiper Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Wiper Motors found

View related parts
Chevrolet Camaro Wiper Motor
Part Number: 22155615
$241.53 MSRP: $433.23
You Save: $191.70 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Windshield Wiper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1995 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 10440412
$230.62 MSRP: $413.64
You Save: $183.02 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaces: 12487575, 12367254, 22110039, 22154913
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 23360290
$68.33 MSRP: $122.02
You Save: $53.69 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor, Windshield Wiper Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 88961292
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper; Front Motor; Motor, Windshield Wiper Motor
- Replaces: 22072788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1992 Chevrolet Camaro | Base, Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 19179659
Product Specifications
- Other Name: Motor Assembly, Windshield Wiper (Remanufacture); Wiper Arm; Washer Pump; Motor; Motor, Windshield Wiper Motor
- Replaces: 22072790, 88961294
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Camaro | Berlinetta, Iroc-Z, LT, Sport, Z28 | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 12363316
Product Specifications
- Other Name: Motor, Windshield Wiper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Camaro | Base, RS, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Wiper Motor
Part Number: 92212322
Product Specifications
- Other Name: Motor Kit, Windshield Wiper Motor
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2015 Chevrolet Camaro | LS, LT, SS, Z/28, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

Chevrolet Camaro Wiper Motor

Our website offers an extensive catalog of genuine Chevrolet Camaro Wiper Motor at unbeatable prices. Every OEM Chevrolet Camaro Wiper Motor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Camaro Wiper Motor Parts Questions & Experts Answers

Wiper Motor
10440412
Q: How to replace the wiper motor on Chevrolet Camaro?
A: Firstly, you can remove the wiper arms, air inlet grille panel, and water shield in order to replace the wiper motor. Then, unscrew it and remove screw and nut, and pull out the RH linkage assembly from the LH linkage assembly using the Wiper Transmission Separator (J 39232). Then take off the linkage LH and the screw from the wiper motor and pull the wiper motor out of the bracket slots. To disconnect the RH linkage assembly from the wiper motor use the Wiper Transmission Separator (J 39232) and pull the electrical connector out of it wiper motor. For installation connect the electrical connector to the wiper motor then connect the RH linkage assembly to the wiper motor with the help of the Wiper Transmission Installer (J 39529) wile the crank arm at most should be in the innerwipe position whin the drive pin is engaged in the cam pocket. Mount the wiper motor with the 2 locator pads pushed into the bracket slots and install and apply the screw on to 10 N.m (7.5 lb ft). Mount the RH linkage assembly on the LH linkage assembly using the Wiper Transmission Installer (J 39529) and attach the LH linkage assembly with screw and nut and tighten to 10 N.m (7.5 lb ft). Lastly, install the water shield over the LH linkage assembly with the flat side underneath the windshield and finally in order air inlet grille panel and wiper arms.