OEM Chevrolet Classic Throttle Cable

Accelerator Throttle Cable
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Throttle Cable found

  • Chevy Classic Throttle Cable - 22681850
    Chevy Classic Throttle Cable Diagram - 22681850
    View related parts
    Product Specifications
    • Other Name: Cable Assembly-Accelerator Control; Control Cable; Cable; Cable, Accelerator Control
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2004-2005 Chevrolet Classic | Base, LS | 4 Cyl 2.2 L GAS

Chevrolet Classic Throttle Cable

Our website offers an extensive catalog of genuine Chevrolet Classic Throttle Cable at unbeatable prices. Every OEM Chevrolet Classic Throttle Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Classic Throttle Cable Parts Questions & Experts Answers

  • Q: How to replace the throttle cable on Chevrolet Classic?
    A: The removal process for the left sound insulator begins first steps before replacing the Throttle Cable. Depress the Throttle Cable tangs from the pedal lever assembly while you remove the cable from its position on the assembly. The replacement process includes removing the cruise control cable in case it is installed. Remove the connector at the Throttle Body assembly that secures the Throttle Cable then lower the Throttle Cable tangs to pull the cable through its bracket. The support clip must be disconnected from the Throttle Cable after which the cable needs to be taken out of the vehicle. Directions for installation require the driver to guide the Throttle Cable through the Throttle Cable bracket and apply pressure on tabs to expand the inner tangs for proper bracket insertion. Installation of the control cable lug on the Throttle Body cam must be followed by connection of the Throttle Cable to the support clip. Implement cruise control cables by first adding the assembly to the pedal lever then expanding tangs completely before seating them properly. The Throttle Cable needs to pass through the accelerator pedal rod slot before installing the retainer while making sure it sits properly inside. Position the throttle cam cable fully beyond both retainers. All flexible components and hose assemblies and wires must be placed at least 50 mm (2.0 in) away from the moving parts of the throttle linkage outboard support unless the routing system has proper control measures. Verifying proper open and close positions requires operating the accelerator pedal to check the throttle valve gets to wide open throttle (WOT) position before finishing with left sound insulator replacement.

Related Chevrolet Classic Parts