OEM Chevrolet Cobalt Air Bag Clockspring

Chevrolet Cobalt Air Bag Clockspring Parts Questions & Experts Answers

• Clockspring
  20940100
  Q: How to replace the Air Bag Clockspring on Chevrolet Cobalt?

  A: To replace the air bag clock spring, has to first, make sure the front wheels are straight and the Steering Wheel in the middle, as it will replace the new sir coil assembly will also be in the middle to avoid typing damage and malfunctions. Turn off the sir system, then detach the air bag clock spring as well as the Steering Wheel and the Steering Column covers. To remove the seat, the seat harness cables must also be disassembled. It is highly because it is situated in the back. Using a little flat bladed tool, carefully pry the two retaining tabs at base of the sir coil assembly and slide it off Steering Column. Then, you should get rid of the headlamp/Turn Signal Switch and the wiper washer switch underpinning the modification of the sir coil module assembly. For installation: install wiper washer switch, then install the headlamp/turn sign switch, and screw it in. Ensure that the sir coil is centered and move the sir coil assembly up the column, and snap it into position. Reattach the wiper/washer harness connector, the head lamp/turn signal harness connector, and the sir coil harness connector to the sir coil module assembly. Finally, install the Steering Column covers, the Steering Wheel, and the air bag clock spring, and turned on the sir system.