How to replace the exhaust pipe extension (RPO L61) on Chevrolet Cobalt?

The replacement of the exhaust extension pipe (RPO L61) should start by loading and supporting the vehicle. Use a suitable Exhaust Pipe cutter to cut the exhaust Muffler pipe at a point just in front of its weld near the front of the exhaust Muffler while supporting the Muffler. First remove the Muffler insulator from the underbody hanger then separate the exhaust Muffler from its installation position. Sanitize the Muffler inlet pipe end after cleaning it and then implement a suitable jack stand beneath the Catalytic Converter to provide support. Several team members should detach the exhaust Muffler pipe nuts from the Catalytic Converter to allow separation of the exhaust Muffler pipe insulators from the underbody hangers. Cutter the Muffler pipe loose from the Catalytic Converter and remove it from the vehicle before discarding the gasket. Use a suitable tool to remove any remaining gasket material from the Catalytic Converter flange mating surfaces. The installation process begins with a new exhaust gasket mounted on the service Muffler pipe studs before you and an assistant jointly install the pipe onto the Catalytic Converter while providing support. You should insert the Muffler pipe insulators to underbody hangers followed by securing the Catalytic Converter Muffler pipe connection using 30 n.m (22 lb ft) torque. Place the Muffler inlet pipe over the Muffler pipe before fitting the underbody hanger with the Muffler insulator. Place a service Muffler clamp on the Muffler inlet pipe at a 19 mm (3/4 in) distance from its edge while positioning the clamp nuts in the direction opposite to the evap canister. Tire the Muffler against the underbody while positioning it to the rear fascia and underbody before clamping its nuts to 45 n.m (33 lb ft). Finally, lower the vehicle.

OEM Chevrolet Cobalt Exhaust Pipe

Exhaust Tail Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Exhaust Pipes found

View related parts
Chevrolet Cobalt Intermediate Pipe Part Number: 15283436
$72.59 MSRP: $421.86
You Save: $349.27 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283438
$629.47
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 19418953
$1583.49 MSRP: $2487.99
You Save: $904.50 (37%)
ADD TO CART
Product Specifications
- Other Name: Converter Assembly, 3Way Catalytic (W/Exhaust Manifold Pipe) "Kit"; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Replaces: 15889902, 22939743
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chevrolet Cobalt | Base, LS, LT, Sport | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 25830118
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Intermediate Pipe Part Number: 15887565
Product Specifications
- Other Name: Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 22712597
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Cobalt | LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Catalytic Converter Part Number: 22695583
Product Specifications
- Other Name: Converter Assembly-3Way Catalytic (W/Exhaust Manifold P; Exhaust Pipe; Converter & Pipe; Converter, Catalytic Converter; Converter, Exhaust Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Cobalt | LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Exhaust Pipe Part Number: 20766957
Product Specifications
- Other Name: Intermediate Pipe; Intermed Pipe; Pipe, Exhaust Tail Pipe
- Replaces: 15831716, 25808621
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cobalt Muffler & Pipe Part Number: 20766954
Product Specifications
- Other Name: Muffler Assembly-Exhaust (W/Resonator, Exhaust & Tail Pipe; Exhaust Pipe; Muffler; Muffler, Exhaust Tail Pipe; Muffler, Exhaust
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chevrolet Cobalt | SS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Cobalt Exhaust Pipe Part Number: 19210866
Product Specifications
- Other Name: Pipe Assembly, Exhaust Resonator; Intermediate Pipe; Pipe, Exhaust Tail Pipe
- Replaces: 15887503
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283439
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Chevrolet Cobalt | Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cobalt Muffler Part Number: 15283437
Product Specifications
- Other Name: Muffler, Exhaust; Muffler, Exhaust Tail Pipe
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chevrolet Cobalt | Base, LS, LT, LTZ | 4 Cyl 2.2 L GAS

Chevrolet Cobalt Exhaust Pipe

Want to cut long-term maintenance and repair costs? Choose OEM Exhaust Pipe. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cobalt parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cobalt Exhaust Pipe includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cobalt Exhaust Pipe is an outstanding commodity, which stresses on the dependability and superiority of the Chevrolet Cobalt line. Functioning to effectively remove bad gases including carbon monoxide from the engine, exhaust pipe helps filter out such poisonous gasses from getting into the engine well or the interior of the vehicle to aid in boosting the safety of all passengers. Specifically used on the Chevrolet Cobalt line of cars with first and second generations, the exhaust pipe is highly essential in enhancing the efficiency of the car's engine. Its specific location and strong construction ensure that problems such as vibration or exhaust noises are minimized; issues which are dangerous to the car's operations. The Chevrolet Cobalt Exhaust Pipe is in a position of either joining perfectly with other features of the exhaust system like the muffler and the catalytic converter for the safe and conducive discharge of expulsions from the engine. For instance, some types have a dual or central pipe arrangement that contributes to superior performance; therefore, the Chevrolet Cobalt is one of the great trends in the automotive industry. In order to have a proper functioning of the exhaust pipe, it is important to have its proper inspection and to maintain it frequently so as to give a long life to it; this once again adds up to the reliability factor of the Chevrolet Cobalt. The Chevrolet Cobalt Exhaust Pipe is therefore a prime representation of efficiency, safety and performance that makes the entire Chevrolet Cobalt process a rich experience for the customers.

Chevrolet Cobalt Exhaust Pipe Parts Questions & Experts Answers

Muffler
15283438
Q: How to replace the exhaust pipe extension (RPO L61) on Chevrolet Cobalt?
A:
The replacement of the exhaust extension pipe (RPO L61) should start by loading and supporting the vehicle. Use a suitable Exhaust Pipe cutter to cut the exhaust Muffler pipe at a point just in front of its weld near the front of the exhaust Muffler while supporting the Muffler. First remove the Muffler insulator from the underbody hanger then separate the exhaust Muffler from its installation position. Sanitize the Muffler inlet pipe end after cleaning it and then implement a suitable jack stand beneath the Catalytic Converter to provide support. Several team members should detach the exhaust Muffler pipe nuts from the Catalytic Converter to allow separation of the exhaust Muffler pipe insulators from the underbody hangers. Cutter the Muffler pipe loose from the Catalytic Converter and remove it from the vehicle before discarding the gasket. Use a suitable tool to remove any remaining gasket material from the Catalytic Converter flange mating surfaces. The installation process begins with a new exhaust gasket mounted on the service Muffler pipe studs before you and an assistant jointly install the pipe onto the Catalytic Converter while providing support. You should insert the Muffler pipe insulators to underbody hangers followed by securing the Catalytic Converter Muffler pipe connection using 30 n.m (22 lb ft) torque. Place the Muffler inlet pipe over the Muffler pipe before fitting the underbody hanger with the Muffler insulator. Place a service Muffler clamp on the Muffler inlet pipe at a 19 mm (3/4 in) distance from its edge while positioning the clamp nuts in the direction opposite to the evap canister. Tire the Muffler against the underbody while positioning it to the rear fascia and underbody before clamping its nuts to 45 n.m (33 lb ft). Finally, lower the vehicle.