How to Service and Repair the Oil Cooler on a Chevrolet Corvette?

Secondly, disconnect all the wiring and hydraulic connections, and then remove any extra parts such as air and fuel line clamps, which are now accessible. Do not cover the car with a cover. Normally, this task takes about one hour. This can only be done if you have the designated tools for the repair. Make sure to thoroughly remove the liner, leaving no fibers on the body of the car. Be sure to check that everything is tightly reassembled toward the end of the repair process. Put an oil drain pan under the vehicle, then loosen the Engine Oil Cooler hose/pipe from the external Oil Cooler. Then, remove the retaining bolts and pull out the external Engine Oil Cooler after discarding all hose/pipe seals. For installation, begin by putting new hose/pipe seals, then install the external Engine Oil Cooler and attach it with retaining bolts, tighten up to 10 n.m (89 lb in). Once you remove the oil drain pan, attach the Engine Oil Cooler hose/pipes to the external Oil Cooler, making sure the quick connect fitting is fitting correctly. Install the left wheelhouse extension and left fender liner and refill the engine with oil and watch for leaks.

OEM Chevrolet Corvette Oil Cooler

Engine Oil Cooler

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

21 Oil Coolers found

View related parts
Chevrolet Corvette Oil Cooler Part Number: 12659714
$199.21 MSRP: $313.45
You Save: $114.24 (37%)
ADD TO CART
Product Specifications
- Other Name: Core, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 15803358
$676.64 MSRP: $1016.00
You Save: $339.36 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Corvette | 427, 427 Limited Edition Z06, Base, Grand Sport, Z06, Z06 Carbon | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 12723808
$95.38 MSRP: $183.52
You Save: $88.14 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly, Engine Oil (W/ Housing)
- Replaced by: 12735193
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023-2024 Chevrolet Corvette | Z06 | 8 Cyl 5.5 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 12644856
$200.19 MSRP: $314.97
You Save: $114.78 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Core, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Cooler Assembly Part Number: 12632831
$354.32 MSRP: $529.64
You Save: $175.32 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Oil Cooler; Cooler; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Chevrolet Corvette | Stingray | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Transmission Cooler Part Number: 24044127
$333.15 MSRP: $497.99
You Save: $164.84 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Trans Fluid (Kit) (11, 12, 13, 14); Oil Cooler; Cooler, Transmission Oil Cooler
- Replaces: 24299314
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray, Z06 | 8 Cyl 5.5 L GAS, 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 12605352
$464.35 MSRP: $697.21
You Save: $232.86 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Chevrolet Corvette | 427, Z06, Z06 Carbon, ZR1 | 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 12666088
$67.84 MSRP: $100.95
You Save: $33.11 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2024 Chevrolet Corvette | E-Ray, Stingray | 8 Cyl 6.2 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Cooler Assembly Part Number: 12670865
$421.92 MSRP: $630.67
You Save: $208.75 (34%)
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Oil Cooler; Cooler; Cooler, Engine Oil Cooler
- Replaces: 12659712
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26033166
Product Specifications
- Other Name: Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1996 Chevrolet Corvette | 40th Anniversary Edition, Base, Collector's Edition, Grand Sport, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26088760
Product Specifications
- Other Name: Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 14084369
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1991 Chevrolet Corvette | 35th Anniversary Edition, Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 14104653
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990-1993 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Cooler Assembly Part Number: 12658068
$382.39 MSRP: $571.58
You Save: $189.19 (34%)
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Oil Cooler; Cooler; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Corvette | Grand Sport, Stingray, Z06, ZR1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 25857216
$172.45 MSRP: $257.77
You Save: $85.32 (34%)
Product Specifications
- Other Name: Cooler Assembly-Engine Oil; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2013 Chevrolet Corvette | Base, Grand Sport | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Corvette Oil Cooler Part Number: 10219643
Product Specifications
- Other Name: Cooler Assembly; Cooler, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26033592
Product Specifications
- Other Name: Cooler; Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chevrolet Corvette | ZR-1 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26076354
Product Specifications
- Other Name: Cooler; Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Corvette | 50th Anniversary Edition, 50th Anniversary Edition Pace Car, Base, Z06 | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26047343
Product Specifications
- Other Name: Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet Corvette | Base, Indianapolis 500 Pace Car | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Corvette Power Steering Cooler Part Number: 26027162
Product Specifications
- Other Name: Cooler, Power Steering Fluid
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1991 Chevrolet Corvette | 35th Anniversary Edition, Base | 8 Cyl 5.7 L GAS

| Page 1 of 2 |Next >

1-20 of 21 Results

Chevrolet Corvette Oil Cooler

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Corvette parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Corvette Oil Cooler includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Oil Cooler is one of those core parts which make Chevrolet Corvette more reliable vehicle. Praised for its effectiveness in controlling temperature of engine oil, this cooler guarantees efficient lubrication and allayed wear and tear on the engine thus increasing their durability. Realising the need for an improved system, the Oil Cooler relays on the bird point- advanced oil to water cooling system to increase conductivity hence dissipating heat effectively to bring the engine to its optimum operating temperature quickly and maintain it whereas during intense use such as towing or spirited driving the danger of over heating is eliminated. This shows that Corvette specifiers are compatible with different generations of Corvette cars, from C1 to C8, proving that it is essential in keeping up optimal performance in different generations. The Oil Cooler does not only an efficiency upgrade but it helps bringing down safety risks linked to possible engine failure due to shear heat. These more elaborate aspects like the construction of the cooler and heat transfer rates make this a superior cooler in the automotive segment, making it perfect for Corvette lovers. Given the generality of the Chevrolet Corvette as a high-performance, luxury automobile that has stood the test of time as well as it has and with its track record for dependability, the Corvette Oil Cooler is a must-have for any to keep their Corvette in the competitive high-performance race car class. Finally, the Oil Cooler goes to show that Chevrolet is all about quality.

Chevrolet Corvette Oil Cooler Parts Questions & Experts Answers

Oil Cooler
15803358
Q: How to Service and Repair the Oil Cooler on a Chevrolet Corvette?
A:
Secondly, disconnect all the wiring and hydraulic connections, and then remove any extra parts such as air and fuel line clamps, which are now accessible. Do not cover the car with a cover. Normally, this task takes about one hour. This can only be done if you have the designated tools for the repair. Make sure to thoroughly remove the liner, leaving no fibers on the body of the car. Be sure to check that everything is tightly reassembled toward the end of the repair process. Put an oil drain pan under the vehicle, then loosen the Engine Oil Cooler hose/pipe from the external Oil Cooler. Then, remove the retaining bolts and pull out the external Engine Oil Cooler after discarding all hose/pipe seals. For installation, begin by putting new hose/pipe seals, then install the external Engine Oil Cooler and attach it with retaining bolts, tighten up to 10 n.m (89 lb in). Once you remove the oil drain pan, attach the Engine Oil Cooler hose/pipes to the external Oil Cooler, making sure the quick connect fitting is fitting correctly. Install the left wheelhouse extension and left fender liner and refill the engine with oil and watch for leaks.