How to Replace a Shift Cable for the Range Selector Lever on Chevrolet Equinox?

The replacement process of the Shift Cable begins with first engaging the parking brake and positioning the shift control range select lever on park (P). It is necessary to disable the supplementary inflatable restraint (SIR) system. First disconnect the shift control cable from the transmission range selector lever after which the user must depress the Shift Cable retainer clip tabs to free the cable from the bracket. The shift-control lever knob, center trim bezel and console trim plate and right side console trim panel require removal. To replace the shift control cable you should start by disconnecting it from the shift control range selector pin. Then push down the retainer clip tabs to extract the cable from the shift control. First detach the shift control cable grommet from the cowl while taking note of its path and then remove the cable from the vehicle. The shift control cable grommet installation requires pushing it through the cowl pass-thru opening when the shift control range select lever remains in park (P). Fasten the shift control cable to the shift control followed by moving the shift control cable onto the shift control range select lever pin. Afterwards replace the right side console panel with its trim parts as well as the center bezel alongside the Shift Knob. Connect the Shift Cable to the transmission range selector lever and mount the shift control cable to the Shift Cable bracket while making sure the retaining tabs fully receive and hold. Before releasing the parking brake the driver must enable sir system and properly adjust Shift Cable.

OEM Chevrolet Equinox Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Shift Cables found

View related parts
Chevrolet Equinox Shift Control Cable Part Number: 23295736
$47.59 MSRP: $80.25
You Save: $32.66 (41%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22890115, 20920071, 20817476, 22737403
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Control Cable Part Number: 84835018
$42.13 MSRP: $65.95
You Save: $23.82 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Shift Control Cable; Cable, Transmission Shift Control Cable
- Replaced by: 87854883
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Equinox Control Cable Part Number: 84414110
$43.13 MSRP: $65.06
You Save: $21.93 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019 Chevrolet Equinox | LT, Premier | 4 Cyl 1.6 L DIESEL
View related parts
Chevrolet Equinox Control Cable Part Number: 84347665
$38.71 MSRP: $60.60
You Save: $21.89 (37%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Shift Control Cable; Cable, Transmission Shift Control Cable
- Replaced by: 87854888
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Equinox | L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Control Cable Part Number: 84231114
$38.06 MSRP: $59.58
You Save: $21.52 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Shift Control Cable; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018 Chevrolet Equinox | LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Control Cable Part Number: 84685790
$37.46 MSRP: $58.67
You Save: $21.21 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Shift Control Cable; Cable, Transmission Shift Control Cable
- Replaced by: 87854884
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Chevrolet Equinox | L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Shift Control Cable Part Number: 15283759
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Shift Control Cable Part Number: 25876979
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 25796282
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS

Chevrolet Equinox Shift Cable

Want to cut long-term maintenance and repair costs? Choose OEM Shift Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Shift Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Equinox Shift Cable Parts Questions & Experts Answers

Shift Control Cable
25876979
Q: How to Replace a Shift Cable for the Range Selector Lever on Chevrolet Equinox?
A:
The replacement process of the Shift Cable begins with first engaging the parking brake and positioning the shift control range select lever on park (P). It is necessary to disable the supplementary inflatable restraint (SIR) system. First disconnect the shift control cable from the transmission range selector lever after which the user must depress the Shift Cable retainer clip tabs to free the cable from the bracket. The shift-control lever knob, center trim bezel and console trim plate and right side console trim panel require removal. To replace the shift control cable you should start by disconnecting it from the shift control range selector pin. Then push down the retainer clip tabs to extract the cable from the shift control. First detach the shift control cable grommet from the cowl while taking note of its path and then remove the cable from the vehicle. The shift control cable grommet installation requires pushing it through the cowl pass-thru opening when the shift control range select lever remains in park (P). Fasten the shift control cable to the shift control followed by moving the shift control cable onto the shift control range select lever pin. Afterwards replace the right side console panel with its trim parts as well as the center bezel alongside the Shift Knob. Connect the Shift Cable to the transmission range selector lever and mount the shift control cable to the Shift Cable bracket while making sure the retaining tabs fully receive and hold. Before releasing the parking brake the driver must enable sir system and properly adjust Shift Cable.