How to replace the Rack and Pinion Outer Tie Rod End on Chevrolet Equinox?

Before you begin replacing the Rack And Pinion outer Tie Rod End you must raise and support your vehicle. You must spray down and save the jam nut placement during your front tire assembly removal work. While holding the ball stud you can loosen the tie rod inner jam nut to stop it from rotating. When replacing the Rack And Pinion outer tie rod you must discard the tie rod to knuckle nut while keeping the ball stud pinned to its place by hand using caution to protect the seal and bushing from damaging tools. The difficulty level in separating the tie rod from the steering knuckle is reduced with the steering linkage and tie rod puller (J 24319-B) allowing workers to extract the outer tie rod from the inner tie rod. Install the outer tie rod onto the inner tie rod before connecting it to the knuckle by threading in a newly installed retention nut. When securing the nut apply a torque of 25 n.m and an angle of 90 degrees (18 lb ft) and another 90 degrees. Install the front tire assembly while checking the vehicle alignment.

OEM Chevrolet Equinox Tie Rod End

Steering Rod End

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Tie Rod Ends found

View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 25956927
$38.74 MSRP: $94.52
You Save: $55.78 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Tie Rod Outer; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End
- Position: Outer
- Replaces: 15140337, 15220347
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 23479348
$49.56 MSRP: $84.37
You Save: $34.81 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Assembly-Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod, Steering Tie Rod Outer
- Position: Outer
- Replaces: 23479349
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2024 Chevrolet Equinox | L, LS, LT, Premier, RS | 4 Cyl 1.5 L GAS, 4 Cyl 1.6 L DIESEL, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 19210064
$57.31 MSRP: $139.86
You Save: $82.55 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 19207057
$89.44 MSRP: $218.23
You Save: $128.79 (60%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 19208276
$68.78 MSRP: $118.11
You Save: $49.33 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 19149840
$67.28 MSRP: $106.81
You Save: $39.53 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | LS, LT, LTZ, Sport | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Outer Tie Rod
Part Number: 22729249
Product Specifications
- Other Name: Rod Kit, Steering Linkage Outer Tie; Steering Tie Rod End; Outer Tie Rod End; Tie Rod End; Rod Kit, Steering Tie Rod Outer
- Position: Outer
- Replaces: 19207750
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS

Chevrolet Equinox Tie Rod End

Our website offers an extensive catalog of genuine Chevrolet Equinox Tie Rod End at unbeatable prices. Every OEM Chevrolet Equinox Tie Rod End comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Equinox Tie Rod End Parts Questions & Experts Answers

Outer Tie Rod
25956927
Q: How to replace the Rack and Pinion Outer Tie Rod End on Chevrolet Equinox?
A: Before you begin replacing the Rack And Pinion outer Tie Rod End you must raise and support your vehicle. You must spray down and save the jam nut placement during your front tire assembly removal work. While holding the ball stud you can loosen the tie rod inner jam nut to stop it from rotating. When replacing the Rack And Pinion outer tie rod you must discard the tie rod to knuckle nut while keeping the ball stud pinned to its place by hand using caution to protect the seal and bushing from damaging tools. The difficulty level in separating the tie rod from the steering knuckle is reduced with the steering linkage and tie rod puller (J 24319-B) allowing workers to extract the outer tie rod from the inner tie rod. Install the outer tie rod onto the inner tie rod before connecting it to the knuckle by threading in a newly installed retention nut. When securing the nut apply a torque of 25 n.m and an angle of 90 degrees (18 lb ft) and another 90 degrees. Install the front tire assembly while checking the vehicle alignment.