How to replace the Hood Cable on Chevrolet Express 2500?

Begin hood primary latch release cable replacement by supporting the hood while it's in an upward position. Disconnect the cable that operates the Hood Latch and the retainer that sticks to the radiator support. Drive the cable and grommet toward the cab while maintaining access through the engine compartment. Start by taking out the screws that hold the Hood Cable handle to the body and then remove the handle. After that detach the left side hinge pillar trim panel from the body. Finally remove the Hood Cable from inside your vehicle. The Hood Cable installation process starts by inserting vehicle cables back into place while feeding them from the interior through the engine bay. Start by mounting the grommet at the bulkhead section before affixing the handle between the body components and securing it with screws. Install the left side hinge pillar trim panel onto the body before mounting the Hood Cable to its retainer on the radiator support and then to the Hood Latch. Finally, close the hood.

OEM Chevrolet Express 2500 Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Hood Cables found

View related parts
Chevrolet Express 2500 Release Cable
Part Number: 15751510
$51.28 MSRP: $76.33
You Save: $25.05 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2022 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Express 2500 Release Cable
Part Number: 22759325
$49.48 MSRP: $73.65
You Save: $24.17 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 25980928
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2024 Chevrolet Express 2500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS
View related parts
Chevrolet Express 2500 Release Cable
Part Number: 15153548
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Replaces: 15734761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-2002 Chevrolet Express 2500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

Chevrolet Express 2500 Hood Cable

Our website offers an extensive catalog of genuine Chevrolet Express 2500 Hood Cable at unbeatable prices. Every OEM Chevrolet Express 2500 Hood Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Express 2500 Hood Cable Parts Questions & Experts Answers

Release Cable
15751510
Q: How to replace the Hood Cable on Chevrolet Express 2500?
A: Begin hood primary latch release cable replacement by supporting the hood while it's in an upward position. Disconnect the cable that operates the Hood Latch and the retainer that sticks to the radiator support. Drive the cable and grommet toward the cab while maintaining access through the engine compartment. Start by taking out the screws that hold the Hood Cable handle to the body and then remove the handle. After that detach the left side hinge pillar trim panel from the body. Finally remove the Hood Cable from inside your vehicle. The Hood Cable installation process starts by inserting vehicle cables back into place while feeding them from the interior through the engine bay. Start by mounting the grommet at the bulkhead section before affixing the handle between the body components and securing it with screws. Install the left side hinge pillar trim panel onto the body before mounting the Hood Cable to its retainer on the radiator support and then to the Hood Latch. Finally, close the hood.