How to replace the power steering pump on Chevrolet K3500?

Place a drain pan beneath the pump before removing the hoses while keeping them capped for preservation. Professionally install the Power Steering Pump pulley remover (J 25034-C) by making sure the pilot bolt reaches the bottom of the pump shaft through a process of directing the nut to the pilot bolt top position before holding the bolt and counterclockwise nut rotation. Proceed to take out the pump by disconnecting the front mounting bolts then removing rear mounting nuts from the studs along with the evo actuator electrical connector. To install the pump first use Power Steering Pump pulley installer (J 25033-C) then secure front mounting bolts with 50 nm (37 ft. Lbs.) torque followed by rear mounting nuts tightened to the same value of 50 nm (37 ft. Lbs.). The pump shaft should receive the pulley while using j 25033-c to add it through the pilot bolt until it rests within the pump shaft. Keep holding the pilot bolt and turn the nut clockwise. Position the pulley at the Power Steering Pump shaft end where it shows 0.5 mm (0.020 inch) of slippage. After installing the Drive Belt and hoses and electrical connector to the evo actuator complete the system fill and bleeding operation and check the hoses and wiring clearance.

OEM Chevrolet K3500 Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Power Steering Pumps found

View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26069036
$246.77 MSRP: $388.28
You Save: $141.51 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet K3500 | Base, LS | 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26065181
$268.35 MSRP: $422.23
You Save: $153.88 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26069033
$468.51 MSRP: $917.30
You Save: $448.79 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump, Power Steering
- Replaced by: 19420681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 19420676
$469.73 MSRP: $806.74
You Save: $337.01 (42%)
ADD TO CART
Product Specifications
- Other Name: Pump Assembly, Power Steering; Pump, Power Steering
- Replaces: 15076613, 15267670, 15134704, 26069034, 15909826, 88963606
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Chevrolet K3500 | Base, LS | 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 88963609
$204.69 MSRP: $337.19
You Save: $132.50 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Kit, Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000, 1996 Chevrolet K3500 | Base, Cheyenne, LS, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 19153678
Product Specifications
- Other Name: Pump Assembly, Power Steering; Pump, Power Steering
- Replaces: 26037445
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26065182
Product Specifications
- Other Name: Pump Assembly-Power Steering
- Replaced by: 26084409
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1998 Chevrolet K3500 | Base, Cheyenne, Silverado | 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26037450
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1995 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26037446
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1996 Chevrolet K3500 | Base, Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26028090
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 6.2 L DIESEL
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26015769
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1991 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26015766
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS
View related parts
Chevrolet K3500 Power Steering Pump Part Number: 26015763
Product Specifications
- Other Name: Pump Assembly-Power Steering; Pump, Power Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet K3500 | Cheyenne, Scottsdale, Silverado | 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 7.4 L GAS

Chevrolet K3500 Power Steering Pump

Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Pump. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet K3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet K3500 Power Steering Pump includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet K3500 Power Steering Pump is a functional extra that improves the usability by converting the energy from the engine into hydraulic power for trouble-free steering by easing the effort of turning the steering wheel, especially on the bigger models. Referred to as the Chevrolet K3500 Power Steering Pump, this part plays a crucial role in steering assurance for the drivers as it enhances steerability, thereby increasing the vehicle's efficiency and safety. It is suitable for different K3500 models manufactured between 1988 and 2002; it works through the crankshaft and deploys either the V-belt or the serpentine one in order to create proper pressure of the required fluid. The steering assistance used in the models K3500 continues to use hydraulic connection between a steering wheel and wheels to offer a rigid solution to the car owner. However, it is possible to encounter standard problems such as leaks or noise; still, the Chevrolet K3500 Power Steering Pump is built to handle tough jobs, which proves the recipient's durability and versatility of the model. For instance, technology has introduced electronic systems that change the power assisted with reference to the speed of the vehicle hence improving the driving experience. The Chevrolet K3500 that forms part of the C/K series is known for its Vortec engines, and the interior features make it even better; this is why many truck lovers adore the car. As a result of the proposed design that combines strength, functionality, and several new features, the Chevrolet K3500 Power Steering Pump optimizes this legendary truck and its potential as a reliable car for drivers in the automotive market.

Chevrolet K3500 Power Steering Pump Parts and Q&A

Power Steering Pump
26069036
Q: How to replace the power steering pump on Chevrolet K3500?
A:
Place a drain pan beneath the pump before removing the hoses while keeping them capped for preservation. Professionally install the Power Steering Pump pulley remover (J 25034-C) by making sure the pilot bolt reaches the bottom of the pump shaft through a process of directing the nut to the pilot bolt top position before holding the bolt and counterclockwise nut rotation. Proceed to take out the pump by disconnecting the front mounting bolts then removing rear mounting nuts from the studs along with the evo actuator electrical connector. To install the pump first use Power Steering Pump pulley installer (J 25033-C) then secure front mounting bolts with 50 nm (37 ft. Lbs.) torque followed by rear mounting nuts tightened to the same value of 50 nm (37 ft. Lbs.). The pump shaft should receive the pulley while using j 25033-c to add it through the pilot bolt until it rests within the pump shaft. Keep holding the pilot bolt and turn the nut clockwise. Position the pulley at the Power Steering Pump shaft end where it shows 0.5 mm (0.020 inch) of slippage. After installing the Drive Belt and hoses and electrical connector to the evo actuator complete the system fill and bleeding operation and check the hoses and wiring clearance.