How to service and repair the coolant reservoir on Chevrolet Lumina?

To repair the coolant reservoir, dismount the reservoir hose clamp and loosen the hose from the radiator's overflow neck fitting. Next, remove the coolant recovery reservoir nut from the shock tower stud and remove the front upper retainer from the coolant recovery reservoir and the upper rail of the front fender. Remove the coolant recovery reservoir from the lower retainer and shock tower stud, then drain and clean it with soap and water, followed by a rinse in clean water. For the installation, connect the coolant recovery reservoir to the lower retainer on the fender and the shock tower stud, followed by installing the front upper retainer to the reservoir and the upper rail of the front fender. Mount the coolant recovery reservoir nut onto the shock tower stud and tighten it to a torque of 3.3 Nm (29 inch lbs.). Lubricate the reservoir hose with clean water and then run it to the neck overflow fitting of the radiator. Finally, secure the reservoir hose and clamp with the clamp tabs down onto the radiator overflow fitting, making sure the end of the hose is flush against the radiator filler neck and the clamp is sitting between the neck and the fitting's flared end. Add coolant to the recovery reservoir if necessary.

OEM Chevrolet Lumina Coolant Reservoir

Coolant Tank Reservoir

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Coolant Reservoirs found

View related parts
Chevrolet Lumina Recovery Tank Part Number: 10285916
$65.93 MSRP: $98.10
You Save: $32.17 (33%)
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir; Reservoir
- Replaces: 10253823, 10259659
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Recovery Tank Part Number: 10239079
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Replaces: 10192783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Base, Euro, Z34 | 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Recovery Tank Part Number: 10060985
Product Specifications
- Other Name: Reservoir, Engine Coolant Recovery; Coolant Reservoir
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1990 Chevrolet Lumina | Base, Euro | 6 Cyl 3.1 L GAS

Chevrolet Lumina Coolant Reservoir

Want to cut long-term maintenance and repair costs? Choose OEM Coolant Reservoir. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Coolant Reservoir includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Lumina Coolant Reservoir is an integral part of the engine cooling system; it has a high reputation and came with better features whenever it was manufactured in different Chevrolet Lumina models ever used from the year 1989 to 2013. This Coolant Reservoir enables control of the surplus coolant fluid, making sure that air would not get into the framework and the coolant would not spill over, both of which are paramount in controlling the engines performance in terms of temperature. Chevrolet Lumina cars come in Pressurized coolant reservoir and Non pressed coolant reservoir which are very efficient and safe. In the pressurized type, the cap of the radiator is made of metal in that it helps regulate the pressure of the coolant in that it provides for coolant expansion as well as contraction while in the case of the non-pressurized type, the force that encourages the coolant to go through the tubes is gravity. Chevrolet Lumina Coolant Reservoir repair and maintenance should involve periodic checks for crack and leakages to keep the vehicle's component functionary. Due to the strategic GM10 FWD chassis on which Lumina was modelled, it has been able to evolve and succeed in different markets thus being suitable for use. For instance, the Coolant Reservoir has molded graduations to help the motorists check the coolant levels so that they can properly service their automobiles. The Chevrolet Lumina Coolant Reservoir is an iconic part with outstanding production and versatility that appeals to the automotive vein of multiple Lumina generations, making the correspondent Chevrolet Lumina even more reliable and capable. In conclusion therefore, the Chevrolet Lumina Coolant Reservoir is a very vital part that has the capacity of improving the overall performance and safety of any car, especially the Chevrolet Lumina.

Chevrolet Lumina Coolant Reservoir Parts Questions & Experts Answers

Recovery Tank
10285916
Q: How to service and repair the coolant reservoir on Chevrolet Lumina?
A:
To repair the coolant reservoir, dismount the reservoir hose clamp and loosen the hose from the radiator's overflow neck fitting. Next, remove the coolant recovery reservoir nut from the shock tower stud and remove the front upper retainer from the coolant recovery reservoir and the upper rail of the front fender. Remove the coolant recovery reservoir from the lower retainer and shock tower stud, then drain and clean it with soap and water, followed by a rinse in clean water. For the installation, connect the coolant recovery reservoir to the lower retainer on the fender and the shock tower stud, followed by installing the front upper retainer to the reservoir and the upper rail of the front fender. Mount the coolant recovery reservoir nut onto the shock tower stud and tighten it to a torque of 3.3 Nm (29 inch lbs.). Lubricate the reservoir hose with clean water and then run it to the neck overflow fitting of the radiator. Finally, secure the reservoir hose and clamp with the clamp tabs down onto the radiator overflow fitting, making sure the end of the hose is flush against the radiator filler neck and the clamp is sitting between the neck and the fitting's flared end. Add coolant to the recovery reservoir if necessary.