How to replace the inlet oil cooler hose on Chevrolet Lumina?

To make the change of oil cooler inlet line, first, drain the coolant from engine's cooling system. Raise and support the vehicle in a suitable manner. Remove the knock sensor's electrical harness connector, disconnect it, and then remove the Oil Filter. Pull the oil cooler outlet hose away from the oil cooler and remove the oil cooler connector. Then, you need to remove the oil cooler inlet hose clamp and the oil cooler, then you need to remove the oil cooler inlet hose clamp, Oil Cooler Hose from the Oil Cooler Hose fitting. If required, remove the fitting of the Oil Cooler Hose. For installation, if the Oil Cooler Hose fitting was unscrewed, screw it back and tighten up to 19 nm (14.ft lbs.). Twist on the oil cooler inlet hose clamp and oil cooler inlet hose into the Oil Cooler Hose fitting in such a way that it is secured and the seal is coated with engine oil. Mount the oil cooler connector and tighten it to 50 nm (37 ft. Lbs) and hook up the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, connect the knock sensor electrical wiring harness connector, and lower the vehicle. Add engine oil if necessary and check the oil cooler for leaks, then fill the cooling system with engine coolant.

OEM Chevrolet Lumina Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Cooler Hoses found

View related parts
Chevrolet Lumina Cooler Pipe Part Number: 24506765
$7.70 MSRP: $14.77
You Save: $7.07 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Outlet Hose Part Number: 24506766
$12.01 MSRP: $18.81
You Save: $6.80 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose; Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Lumina Cooler Line Part Number: 19180191
Product Specifications
- Other Name: Hose; Transmission Oil Cooler Hose; Upper Hose; Line; Lines; Hose, Transmission Oil Cooler; Pipe, Transmission Oil Cooler
- Position: Lower
- Replaces: 10145074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1994 Chevrolet Lumina | Base, Euro, Z34 | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L FLEX, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Lumina Hose Part Number: 12351490
Product Specifications
- Other Name: Hose, Transmission Oil Cooler; Multi Purpose Hose; Cooling Hose; Hose, Engine Coolant Recovery
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Cooler Line Part Number: 10416317
Product Specifications
- Other Name: Hose Assembly-Transmission Oil Cooler; Hose, Transmission Oil Cooler
- Replaces: 10248870
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2001 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Lumina Inlet Hose Part Number: 9439340
Product Specifications
- Other Name: Hose, Fuel & Oil 11/32"X25' Gm-6165M; Multi Purpose Hose; Overflow Hose; Engine Crankcase Ventilation, Coolant Recovery, Oil Cooler, Transfer Case; Standard Parts
- Replaces: 91175589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Lumina | Base, LS, LTZ | 6 Cyl 3.1 L GAS

Chevrolet Lumina Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Lumina parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Lumina Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Lumina Oil Cooler Hose Parts Questions & Experts Answers

Cooler Line
10416317
Q: How to replace the inlet oil cooler hose on Chevrolet Lumina?
A:
To make the change of oil cooler inlet line, first, drain the coolant from engine's cooling system. Raise and support the vehicle in a suitable manner. Remove the knock sensor's electrical harness connector, disconnect it, and then remove the Oil Filter. Pull the oil cooler outlet hose away from the oil cooler and remove the oil cooler connector. Then, you need to remove the oil cooler inlet hose clamp and the oil cooler, then you need to remove the oil cooler inlet hose clamp, Oil Cooler Hose from the Oil Cooler Hose fitting. If required, remove the fitting of the Oil Cooler Hose. For installation, if the Oil Cooler Hose fitting was unscrewed, screw it back and tighten up to 19 nm (14.ft lbs.). Twist on the oil cooler inlet hose clamp and oil cooler inlet hose into the Oil Cooler Hose fitting in such a way that it is secured and the seal is coated with engine oil. Mount the oil cooler connector and tighten it to 50 nm (37 ft. Lbs) and hook up the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, connect the knock sensor electrical wiring harness connector, and lower the vehicle. Add engine oil if necessary and check the oil cooler for leaks, then fill the cooling system with engine coolant.