Make sure this part fits

GM 24506766
Outlet Hose

1996-2007 GM

Customer Questions & Expert Answers (9)
GM 24506766 Outlet Hose
  • Part Description
    Hose, Engine Oil Cooler; Oil Cooler Hose
  • Manufacturer
    General Motors
Make sure this part fits
$12.01 MSRP: $18.81
You Save: $6.80 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number24506766
    Part DescriptionHose, Engine Oil Cooler; Oil Cooler Hose
    Other NamesHose
    Item Dimensions3.4 x 2.7 x 0.7 inches
    Item Weight0.30 Pounds
    ConditionNew
    Fitment TypeDirect Replacement
    ManufacturerGeneral Motors
    SKU24506766
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007, 2002-2004 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    1996-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1996-1999 Chevrolet Monte CarloLS6 Cyl 3.1 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    1997-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    2001-2004 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    1999-2006 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24506766 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24506766 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you begin the installation process for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Begin by installing the upper or lower oil cooler outlet hose(s) to the oil cooler pipe, followed by the oil cooler outlet hoses and pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What should be done after installing the oil cooler hose fitting for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Attach the oil cooler inlet hose clamp and the oil cooler inlet hose to the oil cooler hose fitting, ensuring the oil cooler seal is in place and coated with engine oil.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What needs to be disconnected before removing the oil filter for the 2000 Chevrolet Venture? Posted by Customer
    A:
    The knock sensor electrical connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What should be disconnected after raising for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the knock sensor electrical connector and remove the oil filter.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the first step to replace the oil cooler inlet line for the 2001 Chevrolet Venture? Posted by Customer
    A:
    First, drain the engine coolant from the cooling system and then raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    How should the oil cooler pipe bracket bolt be installed for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Install the oil cooler pipe bracket bolt through the oil cooler pipe bracket into the right engine mount strut bracket, tightening the bolt to 10 Nm (89 inch lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What needs to be disconnected next for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the upper oil cooler outlet hose from the thermostat bypass pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the next step after removing the oil filter for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the oil cooler outlet hose from the oil cooler, remove the oil cooler connector, and take off the oil cooler inlet hose clamp along with the oil cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 24506766, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 24506766 Outlet Hose. It is sometimes referred to as GM Cooling Hose, GM Oil Cooler Hose. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 24506766 Outlet Hose. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery