Make sure this part fits

GM 24506765
Cooler Pipe

1996-2007 GM

Customer Questions & Expert Answers (9)
GM 24506765 Cooler Pipe
  • Part Description
    Pipe, Engine Oil Cooler
  • Manufacturer
    General Motors
Make sure this part fits
$7.70 MSRP: $14.77
You Save: $7.07 (48%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006-2007, 2002-2004 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS
    1996-1999 Chevrolet LuminaBase, LS, LTZ6 Cyl 3.1 L GAS
    1996-1999 Chevrolet Monte CarloLS6 Cyl 3.1 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS
    1997-2004 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    1997-2004 Oldsmobile SilhouetteBase, GL, GLS, GS, Premiere6 Cyl 3.4 L GAS
    2001-2004 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    1999-2005 Pontiac MontanaBase, SV66 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
    1997-1998 Pontiac Trans SportBase, Montana6 Cyl 3.4 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24506765 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24506765 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the inlet oil cooler hose on Chevrolet Venture? Posted by Customer
    A:
    When replacing the oil cooler inlet line, drain the engine coolant from the cooling system and then lift the vehicle and support it. Remove the knock sensor knock electric connector and filter the engine oil. Next, detach the oil cooler outlet hose from the oil cooler, then remove oil cooler connector and take off oil cooler inlet hose clamp and oil cooler. Take off the oil cooler inlet hose clamp and oil cooler inlet hose from the Oil Cooler Hose fitting, and if possible the Oil Cooler Hose fitting. For installation: if one removed the Oil Cooler Hose fitting, then it was to be installed, with a tightness of 19 nm (14 ft. Lbs.). Next, install the oil cooler inlet hose clamp and the oil cooler inlet hose at the Oil Cooler Hose fitting. Attach the oil cooler inlet hose clamp to the oil cooler while ensuring that the oil cooler seal is in its position and covered with engine oil. Mount the oil cooler connector and tighten it to 50 nm (37 ft. Lbs) and then connect the oil cooler outlet hose to the oil cooler. Install the Oil Filter back, reconnect the knock sensor electrical connector, drop the vehicle, and add engine coolant to the system. Top up with engine oil and look for any leaks on the oil cooler.
    Posted by ChevyPartsGiant Specialist
    Q:
    What should be connected after tightening the oil cooler connector for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Connect the oil cooler outlet hose to the oil cooler.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What should be done with the upper or lower oil cooler outlet hose(s) for the 2002 Buick Rendezvous? Posted by Customer
    A:
    Remove the upper or lower oil cooler outlet hose(s) from the oil cooler pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the next step after removing the oil filter for the 2002 Chevrolet Venture? Posted by Customer
    A:
    Disconnect the oil cooler outlet hose from the oil cooler, followed by removing the oil cooler connector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the next step regarding the upper or lower oil cooler outlet hoses for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Remove the upper or lower oil cooler outlet hose(s) from the oil cooler pipe.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the first step to replace the oil cooler inlet line for the 2004 Chevrolet Venture? Posted by Customer
    A:
    Drain the engine coolant from the cooling system and then raise and support the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What should be done after installing the bracket bolt for the 2003 Chevrolet Venture? Posted by Customer
    A:
    Fill the cooling system with engine coolant, add engine oil as necessary, and inspect the oil cooler for leaks.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    Q:
    What is the next step after installing the oil cooler hose fitting for the 2000 Chevrolet Venture? Posted by Customer
    A:
    Install the oil cooler inlet hose clamp and the oil cooler inlet hose to the oil cooler hose fitting.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Oil Cooler Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cooler Pipe 24506765 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24506765 Cooler Pipe is available in the market under the name GM Cooling Hose, Oil Cooler Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24506765 Cooler Pipe fits certain Chevrolet Lumina, Monte Carlo, Uplander models, as well as Buick Rendezvous, Terraza. Additionally, it is compatible with Pontiac Aztek, Montana, Trans Sport and Oldsmobile Silhouette models.
The original GM component designated by manufacturer part number 24506765 maintains top performance when functioning as the Pipe, Engine Oil Cooler unit. The component 24506765 is constructed from durable material and its dimensions span 6.1 x 14.4 x 1.1 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 24506765 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.