How to replace the inlet oil cooler hose on Buick Rendezvous?

To replace the oil cooler inlet line, empty the engine coolant from the cooling system and then lift and support the vehicle. Unplug the knock sensor electronic connector and take out the Oil Filter. Now, take off the hose connected to the oil cooler outlet and the oil cooler connector. Stop the hose clamp on the top of the oil cooler and get rid of the oil cooler, remove the hose clamp on the port then remove the Oil Cooler Hose from the oil cooler fitting on the hose. If necessary, remove the Oil Cooler Hose connection. For repair, if the Oil Cooler Hose fitting were to be removed, insert it and tighten to 19 nm (14ft. Lbs.). Secure the oil cooler hose with a hose clamp and ensure the oil cooler is properly seated. Install the oil cooler connector and fasten to 50 nm (37 ft. Lbs.), and connect the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, reconnect the knock sensor electrical connector, drop the vehicle, and fill the cooling system with engine coolant. Top up on engine oil where needed and check the oil cooler for leaks.

OEM Buick Rendezvous Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Oil Cooler Hoses found

View related parts
Buick Rendezvous Hose
Part Number: 24504912
$9.84 MSRP: $18.47
You Save: $8.63 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Throttle Body Heater Inlet; Multi Purpose Hose; Cooling Hose; Hose, Throttle Body Coolant Supply; Hose, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2005 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS
View related parts
Buick Rendezvous Cooler Pipe
Part Number: 24506765
$7.70 MSRP: $14.77
You Save: $7.07 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007, 2002-2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Rendezvous Outlet Hose
Part Number: 24506766
$12.01 MSRP: $18.81
You Save: $6.80 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose; Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007, 2002-2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS
View related parts
Buick Rendezvous Inlet Hose
Part Number: 9439340
Product Specifications
- Other Name: Hose, Fuel & Oil 11/32"X25' Gm-6165M; Multi Purpose Hose; Overflow Hose; Engine Crankcase Ventilation, Coolant Recovery, Oil Cooler, Transfer Case; Standard Parts
- Replaces: 91175589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007, 2002-2004 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS

Buick Rendezvous Oil Cooler Hose

Our website offers an extensive catalog of genuine Buick Rendezvous Oil Cooler Hose at unbeatable prices. Every OEM Buick Rendezvous Oil Cooler Hose comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous Oil Cooler Hose Parts Questions & Experts Answers

Hose
24504912
Q: How to replace the inlet oil cooler hose on Buick Rendezvous?
A: To replace the oil cooler inlet line, empty the engine coolant from the cooling system and then lift and support the vehicle. Unplug the knock sensor electronic connector and take out the Oil Filter. Now, take off the hose connected to the oil cooler outlet and the oil cooler connector. Stop the hose clamp on the top of the oil cooler and get rid of the oil cooler, remove the hose clamp on the port then remove the Oil Cooler Hose from the oil cooler fitting on the hose. If necessary, remove the Oil Cooler Hose connection. For repair, if the Oil Cooler Hose fitting were to be removed, insert it and tighten to 19 nm (14ft. Lbs.). Secure the oil cooler hose with a hose clamp and ensure the oil cooler is properly seated. Install the oil cooler connector and fasten to 50 nm (37 ft. Lbs.), and connect the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, reconnect the knock sensor electrical connector, drop the vehicle, and fill the cooling system with engine coolant. Top up on engine oil where needed and check the oil cooler for leaks.