Make sure this part fits

GM 24504912
Hose

2001-2005 GM

Customer Questions & Expert Answers (3)
GM 24504912 Hose
GM 24504912 Hose
  • Part Description
    Hose-Throttle Body Heater Inlet; Multi Purpose Hose; Cooling Hose
  • Manufacturer
    General Motors
Make sure this part fits
$10.03 MSRP: $18.83
You Save: $8.80 (47%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Buick RendezvousCX, CX Plus, CXL, CXL Plus6 Cyl 3.4 L GAS
    2001-2005 Pontiac AztekBase, GT, Rally6 Cyl 3.4 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 24504912 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 24504912 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the outlet oil cooler hose on Buick Rendezvous? Posted by Customer
    A:
    Top the engine coolant from the cooling system before replacing the oil cooler outlet line. Take out the oil cooler pipe bracket bolt from the oil cooler pipe bracket located in the right engine mount strut bracket, then disconnect the upper oil cooler outlet hose from the thermostat bypass pipe. Lift and hand the vehicle, remove the lower outlet hose from the oil cooler, and take out the oil cooler outlet hoses and pipe. Next, take off the hose(s) from the upper or lower oil cooler outlet hose(s) from oil cooler pipe. For installation, install the upper or lower oil cooler outlet hose(s) to the oil cooler pipe, after which you should install the oil cooler outlet hoses and pipe. Connect the lower outlet hose of the oil cooler to the oil cooler, then lower the vehicle and connect the upper outlet hose of the oil cooler to the thermostat bypass pipe. Use the oil cooler pipe bracket bolt to bolt the oil cooler pipe bracket to the right engine mount strut bracket with a 10 nm (89 inch lbs.) torque. Add engine coolant into the cooling system, service engine oil if needed, and check the oil cooler for leaks.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the inlet oil cooler hose on Buick Rendezvous? Posted by Customer
    A:
    To replace the oil cooler inlet line, empty the engine coolant from the cooling system and then lift and support the vehicle. Unplug the knock sensor electronic connector and take out the Oil Filter. Now, take off the hose connected to the oil cooler outlet and the oil cooler connector. Stop the hose clamp on the top of the oil cooler and get rid of the oil cooler, remove the hose clamp on the port then remove the Oil Cooler Hose from the oil cooler fitting on the hose. If necessary, remove the Oil Cooler Hose connection. For repair, if the Oil Cooler Hose fitting were to be removed, insert it and tighten to 19 nm (14ft. Lbs.). Secure the oil cooler hose with a hose clamp and ensure the oil cooler is properly seated. Install the oil cooler connector and fasten to 50 nm (37 ft. Lbs.), and connect the oil cooler outlet hose to the oil cooler. Replace the Oil Filter, reconnect the knock sensor electrical connector, drop the vehicle, and fill the cooling system with engine coolant. Top up on engine oil where needed and check the oil cooler for leaks.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hose 24504912 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 24504912 Hose is available in the market under the name GM Cooling Hose, Oil Cooler Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 24504912 Hose fits certain Buick Rendezvous models, as well as Pontiac Aztek models.
The original GM component designated by manufacturer part number 24504912 maintains top performance when functioning as the Hose-Throttle Body Heater Inlet; Multi Purpose Hose; Cooling Hose unit. The component 24504912 is constructed from durable material and its dimensions span 4.2 x 2.1 x 1.0 inches while weighing 0.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hose, Throttle Body Coolant Supply; Hose, Engine Oil Cooler. The part 24504912 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.