ChevyParts
My Garage
My Account
Cart
OEM Chevrolet Lumina Fuel Rail
Engine Fuel Rail- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
12 Fuel Rails found
Chevrolet Lumina Fuel Rail
Part Number: 17113256$113.11 MSRP: $229.18You Save: $116.07 (51%)Ships in 1-2 Business Days
Chevrolet Lumina Fuel Rail
Part Number: 17113608$119.91 MSRP: $225.16You Save: $105.25 (47%)Ships in 1-2 Business Days
Chevrolet Lumina Fuel Rail
Our website offers an extensive catalog of genuine Chevrolet Lumina Fuel Rail at unbeatable prices. Every OEM Chevrolet Lumina Fuel Rail comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Lumina Fuel Rail Parts Questions & Experts Answers
- Q: How to service the fuel rail using the J 43013 fuel injector removal tool on Chevrolet Lumina?A: The j 43013 (Fuel Injector removal tool) needs to be used for Fuel Rail servicing. The service on a Fuel Rail requires initial steps to relieve pressure from fuel system followed by upper Intake Manifold removal. The service requires disconnection of the engine fuel feed pipe from the Fuel Rail followed by separation of engine fuel return pipe from the Fuel Pressure Regulator. The service also involves removal and disposal of the o-rings from both fuel feed pipe and fuel return pipe. Service begins by disconnecting both the main injector harness electrical connector followed by the coolant temperature sensor electrical connector. Utilize the j 43013 (Fuel Injector removal tool) to lift all fuel injectors before taking out the Fuel Rail assembly after removing the retaining bolts. You need to pull the lock release while pressing down on the lock tab so you can lift the connector from the injector. Remove the o-ring seals from injector spraying tips but keep and reuse the back up o-ring pieces. The procedure for Fuel Rail installation includes plugging its ports to stop contamination entry while also cautioning against compressing air or using solvent baths on the Fuel Rail assembly. The injector electrical harness should be reattached to the Fuel Rail while the electrical connectors are connected before pushing the slide lock into its final position. Before installing new o-rings for the injectors users must place each o-ring back up on its corresponding injector. Users should lubricate the o-rings with a small amount of clean engine oil while they position them at the spray tip end of each injector unit. The Fuel Rail assembly should be inserted into its Intake Manifold position while injector installation allows for proper seating and Fuel Rail attaching bolts must be tightened to 10 nm (7 lb ft). Installation requires connecting Fuel Rail electrical connectors followed by new o-rings insertion on fuel feed and fuel return pipes. The fuel feed pipe should be reinstalled on the Fuel Rail by tightening the engine fuel pipe nut to 17 nm (13 lb ft). The same tightening torque should be used to connect the fuel return pipe at the Fuel Pressure Regulator. Reinstall the upper Intake Manifold then fasten the fuel filler cap along with reconnecting the negative Battery Cable before checking for fuel leaks according to the specified procedures.
Related Chevrolet Lumina Parts
Chevrolet Lumina Air Charge Temperature Sensor
Chevrolet Lumina Cruise Control Servo
Chevrolet Lumina Fuel Injector
Chevrolet Lumina Fuel Pressure Regulator
Chevrolet Lumina Fuel Pressure Sensor
Chevrolet Lumina Fuel Pump Strainer
Chevrolet Lumina Fuel Pump Wiring Harness
Chevrolet Lumina Fuel Tank Sending Unit
Chevrolet Lumina Fuel Tank Strap
Chevrolet Lumina Gas Cap
Chevrolet Lumina Idle Control Valve
Chevrolet Lumina Intake Manifold