How to replace the steering wheel on Chevrolet Monte Carlo?

The replacement process for steering wheels begins by disabling the restraints system and then switching off ignition power. First scribe a reference mark across the Steering Wheel hub before aligning it to the cut mark on the Steering Shaft. Use a wrench to turn the nut counterclockwise until its edge meets the Steering Shaft's end. The Steering Wheel puller (J 1859-A) with Steering Wheel puller legs (J 42578) should be assembled to use for unseating the Steering Wheel from its position on the Steering Shaft. First use the puller assembly to unseat the Steering Wheel from the Steering Shaft before removing the Steering Shaft nut and Steering Wheel itself from the shaft and finally disconnecting the sir connector from the Steering Wheel. To install the sir connector just run it through the Steering Wheel before setting the scribe mark to match the Steering Shaft's slash mark and mounting the Steering Wheel. Begin by installing the Steering Shaft nut to a torque setting of 45 nm (33 ft. Lbs.) then put on the inflatable restraint Steering Wheel module before enabling restraints system operations. End your inspection process by checking the Horn functionality along with Steering Wheel sensation and control operations.

OEM Chevrolet Monte Carlo Steering Wheel

Navigation Steering Wheel

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Steering Wheels found

View related parts
Chevrolet Monte Carlo Steering Wheel Part Number: 25868420
Product Specifications
- Other Name: Wheel, Steering
- Replaces: 15874808
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel Part Number: 15874811
$213.94 MSRP: $336.60
You Save: $122.66 (37%)
Product Specifications
- Other Name: Wheel, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel, Leather Part Number: 16821632
Product Specifications
- Other Name: Wheel, Steering
- Replaces: 16759678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel, Red, Leather Part Number: 16760534
Product Specifications
- Other Name: Wheel, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1998 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel, Black Part Number: 16752010
Product Specifications
- Other Name: Wheel Assembly-Steering *Black; Wheel, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel Part Number: 10355134
Product Specifications
- Other Name: Wheel, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel Part Number: 10291236
Product Specifications
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Wheel Part Number: 10355136
Product Specifications
- Other Name: Wheel, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Steering Wheel

Want to cut long-term maintenance and repair costs? Choose OEM Steering Wheel. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Steering Wheel includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Steering Wheel Parts Questions & Experts Answers

Steering Wheel
10355134
Q: How to replace the steering wheel on Chevrolet Monte Carlo?
A:
The replacement process for steering wheels begins by disabling the restraints system and then switching off ignition power. First scribe a reference mark across the Steering Wheel hub before aligning it to the cut mark on the Steering Shaft. Use a wrench to turn the nut counterclockwise until its edge meets the Steering Shaft's end. The Steering Wheel puller (J 1859-A) with Steering Wheel puller legs (J 42578) should be assembled to use for unseating the Steering Wheel from its position on the Steering Shaft. First use the puller assembly to unseat the Steering Wheel from the Steering Shaft before removing the Steering Shaft nut and Steering Wheel itself from the shaft and finally disconnecting the sir connector from the Steering Wheel. To install the sir connector just run it through the Steering Wheel before setting the scribe mark to match the Steering Shaft's slash mark and mounting the Steering Wheel. Begin by installing the Steering Shaft nut to a torque setting of 45 nm (33 ft. Lbs.) then put on the inflatable restraint Steering Wheel module before enabling restraints system operations. End your inspection process by checking the Horn functionality along with Steering Wheel sensation and control operations.