What should be inspected on those involved in accidents that may have a damaged or misaligned steering column on Chevrolet Monte Carlo?

A vehicle sustaining any of these three categories from accidents will potentially develop misalignment or damage to its Steering Column: frame damage, major body damage, sheet metal damage and impact to the Steering Column and deployment of the supplemental inflatable restraints system. A visual inspection of the capsules within the Steering Column bracket assembly needs to be performed to verify proper seat alignment inside bracket slots then test for loose assembly components when using hand pressure. Check the bracket attachment to the jacket assembly; the bracket needs exchange only when capsules do not fit securely or when the bracket remains connected to the jacket assembly. Any bracket that comes with welded fixtures to the jacket assembly needs a replacement jacket assembly but not the bracket itself. Check for jacket assembly collapse by measuring the lower edge distance of upper to lower jacket points while replacing the whole assembly if measurements exceed specified standards. A visual check of the Steering Shaft should evaluate whether sheared injected plastic exists. The shaft requires replacement if any sheared plastic is detected. A dial indicator to check runout measurement on the lower end of the Steering Shaft during wheel rotation at maximum specification of 1.60 mm (0.06 inch) needs to be performed to inspect Steering Shaft alignment following any frame damage that might result in shaft bending.

OEM Chevrolet Monte Carlo Steering Column

Steering Column Tilt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Steering Columns found

View related parts
Chevrolet Monte Carlo Steering Column Part Number: 15913861
$236.41 MSRP: $1173.91
You Save: $937.50 (80%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Column Assembly; Column, Steering
- Replaces: 15800480, 15800482
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26062795
Product Specifications
- Other Name: Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000 Chevrolet Monte Carlo | LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26040440
Product Specifications
- Other Name: Column Assembly; Column, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 15913860
Product Specifications
- Other Name: Column Assembly-Steering *Vr Dark Cashme; Column, Steering
- Replaces: 15800481, 15850074
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26095810
Product Specifications
- Other Name: Column Assembly; Column, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Jacket Part Number: 26045684
Product Specifications
- Other Name: Jacket, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26043098
Product Specifications
- Other Name: Column, Steering; Column Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Jacket Assembly Part Number: 26042712
Product Specifications
- Other Name: Jacket, Steering; Jacket
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Jacket Assembly Part Number: 26042693
Product Specifications
- Other Name: Jacket, Seat; Jacket; Jacket, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26040439
Product Specifications
- Other Name: Column, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 26040436
Product Specifications
- Other Name: Column Assembly; Column, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Steering Column Part Number: 15913858
Product Specifications
- Other Name: Column, Steering
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Steering Column

Want to cut long-term maintenance and repair costs? Choose OEM Steering Column. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Steering Column includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo's Steering Column therefore plays the central role in controlling the car with precision and safety. It links the steering wheel to the steering gear, with a view of passing signals and torque together with the right angles to result in the right response. Furthermore, the steering column of Monte Carlo vehicles comes set up with a collapsible type that will help protect the driver in an event of a crash; a tolerance ring which enabled a slow and gradual collapsing of the steering column in order to absorb the energy impact. The design also features universal joints and is designed following the federal standards on anti theft and safety features. Steering column problem is very dangerous and therefore requires timely check up or, if there are symptoms, then regular repair.

Chevrolet Monte Carlo Steering Column Parts Questions & Experts Answers

Steering Column
15913861
Q: What should be inspected on those involved in accidents that may have a damaged or misaligned steering column on Chevrolet Monte Carlo?
A:
A vehicle sustaining any of these three categories from accidents will potentially develop misalignment or damage to its Steering Column: frame damage, major body damage, sheet metal damage and impact to the Steering Column and deployment of the supplemental inflatable restraints system. A visual inspection of the capsules within the Steering Column bracket assembly needs to be performed to verify proper seat alignment inside bracket slots then test for loose assembly components when using hand pressure. Check the bracket attachment to the jacket assembly; the bracket needs exchange only when capsules do not fit securely or when the bracket remains connected to the jacket assembly. Any bracket that comes with welded fixtures to the jacket assembly needs a replacement jacket assembly but not the bracket itself. Check for jacket assembly collapse by measuring the lower edge distance of upper to lower jacket points while replacing the whole assembly if measurements exceed specified standards. A visual check of the Steering Shaft should evaluate whether sheared injected plastic exists. The shaft requires replacement if any sheared plastic is detected. A dial indicator to check runout measurement on the lower end of the Steering Shaft during wheel rotation at maximum specification of 1.60 mm (0.06 inch) needs to be performed to inspect Steering Shaft alignment following any frame damage that might result in shaft bending.