Other Name: Bulb, Front Turn Signal Lamp; Turn Signal Bulbs; Tail Light Bulbs; Car Bulbs; Bulbs for Parking, Marker, High Mount, Exterior, License, Turn Signal, Chassis, Courtesy, Headlamp, Tail
Position: Front
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Bulb, Headlamp (High Beam); Headlight Bulbs; Car Bulbs; Headlight; Headlamp Bulb; High Beam; Composite Assembly; Fog Lamp/Turn Signal; Capsule Bulb
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007 Chevrolet Silverado 1500 Classic | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Chevrolet Silverado 1500 Classic Headlight Bulb
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Classic Headlight Bulb at unbeatable prices. Every OEM Chevrolet Silverado 1500 Classic Headlight Bulb comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Classic Headlight Bulb Parts Questions & Experts Answers
Q: How to replace the front headlight bulb on Chevrolet Silverado 1500 Classic?
A: Begin bulb replacement of the headlamp by switching off the lamp and waiting for it to cool down. Handle the bulb strictly at the base while wearing protective eyewear because contact with the glass should be avoided along with moisture and dirt sources. Before unscrewing the headlamp retainer pins you should first open the hood. To remove the headlamp assembly you should pull it out to reach the electrical connector where you must then disconnect it. Crucially rotate the bulb to the left until it comes out freely. Install new bulbs following standard procedure where high beam bulbs replace others with matching characteristics (red gasket) and low beam bulbs should get exchanged with corresponding bulbs (gray tip and yellow gasket). Following installation of the new bulb by a counterclockwise twist to secure it in place you must reconnect the electrical connector and reposition the headlamp assembly. After securing the retainer pins through rotation until locked position it is time to perform an operation checkup. Discard the used bulb safely while storing all halogen bulbs where children cannot access them.