The first step to replacing the cruise control module is to take out the upper fender brace bolts and after that, the upper fender brace. Then, you should take off the electrical connector from the cruise control module and undo the module's nuts. Release the cruise control cable from the module and after that, take the cruise control module out. When you are installation, place the cruise control module first and then attach the cruise control cable to it. Attach the nuts to the module and tighten them to 9 N.m (80 lb in), and then attach the electrical connector. At the end, install the upper fender brace again and fasten it with the bolts, be sure to tighten them to 9 N.m (80 lb in).