Other Name: Injector Assembly, Fuel; Fuel Injector; Injector, Fuel Injection
Replaces: 97780358, 97361355
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006 Chevrolet Silverado 1500 | Hybrid, LS, LT, SS, WT | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
Other Name: Injector Assembly, Direct Fuel-Remanufacture; Injector, Fuel Injection
Replaces: 97303657
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2001-2005 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
| Page 1 of 2 |Next >
1-20 of 26 Results
Chevrolet Silverado 1500 Fuel Injector
Our website offers an extensive catalog of genuine Chevrolet Silverado 1500 Fuel Injector at unbeatable prices. Every OEM Chevrolet Silverado 1500 Fuel Injector comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Silverado 1500 Fuel Injector Parts Questions & Experts Answers
Q: How to replace a fuel injector on Chevrolet Silverado 1500?
A: You should remove the fuel meter body ahead of replacing the fuel injector but remember the engine oil will contain fuel if fuel injectors leak. You must remove the injector retainer lock nuts followed by the retainer. To remove the fuel injector pull it downward while inserting a small tip punch that should press between the terminals until the injector frees without damaging the electrical connector terminals. Due to the electrical nature of these fuel injectors they should be handled as complete assemblies only because submerging them in any kind of cleaning solution can harm them too much for cleaning to be advisable. It is essential to pick the specific fuel injector that matches the application when placing a new order. The NEW injector O-ring seals require clean engine oil lubrication before putting the fuel injector into the fuel meter body injector socket. Proceed with installation of the injector retainer and its lock nuts and tighten them to 3 N.m (27 lb in) before reattaching the fuel meter body.