Make sure this part fits

GM 97780474
Injector

2006-2007 GM

Customer Questions & Expert Answers (14)
GM 97780474 Injector
  • Part Description
    Injector Assembly, Fuel; Fuel Injector
  • Replaces
    97780358, 97361355
  • Manufacturer
    General Motors
Make sure this part fits
$486.29 MSRP: $963.93
You Save: $477.64 (50%)
Core Charge: $100.00
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2006 Cadillac EscaladeBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2006 Chevrolet Avalanche 1500LS, LT, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2006 Chevrolet Avalanche 2500LS, LT8 Cyl 8.1 L GAS
    2006-2007 Chevrolet Express 2500Base, LS, LT8 Cyl 6.6 L DIESEL
    2006-2007 Chevrolet Express 3500Base8 Cyl 6.6 L DIESEL
    2006 Chevrolet Silverado 1500Hybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2006 Chevrolet Silverado 1500 HDLT8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Hey, is 97780474 a good match for my vehicle? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 97780474 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after removing the fuel rail for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove and discard the fuel injector retaining clip and then take out the injector from the fuel rail, discarding the injector O-ring seals from both ends.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What should you be careful about when removing the injector retainer lock nuts and retainer for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Avoid damaging the electrical connector terminals while removing the fuel injectors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What is the next step after lubricating the O-ring seals for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install the O-ring seals onto the fuel injector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What should be done with the J 41413 EVAP Pressure and Purge Station for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Close the valve on the tank before removing the regulator assembly and installing the J 44466-10 to the J 41413 tank.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What should be ensured when ordering new fuel injectors for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Ensure you order the correct injector for the application, as the fuel injector has an identification part number and a four-digit build date code.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you connect and use the Fuel Injector Cleaner for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Connect the Fuel Injector Cleaner to the fuel rail, pressurize it to 510 kPa (75 psi), and run the engine until it stalls.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What tools are needed to clean the fuel injectors for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    J 37287 (Fuel Line Shut-Off Adapters), J 35800-A (Fuel Injector Cleaner), J 42873-1 (3/8 Fuel Line Shut-Off Valve), J 42873-2 (5/16 Return Pipe Shut-Off Valve), J 42964-1 (3/8 Fuel Pipe Shut-Off Valve), and J 42964-2 (5/16 Fuel Pipe Shut-Off Valve).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What should you do with the new injector O-ring seals before installation for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Lubricate the new injector O-ring seals with clean engine oil and install them onto the injector.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What are the steps to prepare for injector cleaning for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Fill the injector cleaning tank with regular unleaded gasoline, disable the vehicle fuel pump, and disconnect the fuel feed and return line, plugging them appropriately with the required shut-off valves.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What should be ensured when installing a new fuel injector for the 2006 GMC Sierra 1500? Posted by Customer
    A:
    Ensure the correct injector is ordered for the application.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    What happens if the O-rings and retaining clips need to be replaced for the 2007 GMC Savana 2500? Posted by Customer
    A:
    The entire injector must be replaced if these components need to be replaced.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you disconnect the fuel system components for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Disconnect the chassis fuel feed pipe and EVAP tube quick connect fittings, then disengage the retainer securing the EVAP canister purge solenoid to the fuel rail and remove the fuel rail bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    Q:
    How do you remove the injector for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Pull it downward while using a small tip punch to push down between the injector terminals until it is free.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Fuel Injector
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Injector 97780474 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 97780474 Injector is available in the market under the name GM Fuel Injector. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 97780474 Injector fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 97780474 maintains top performance when functioning as the Injector Assembly, Fuel; Fuel Injector unit. The component 97780474 is constructed from durable material and its dimensions span 6.4 x 3.3 x 11.1 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Injector, Fuel Injection. The part 97780474 has available replacement options 97780358, 97361355. Each vehicle needs 8 units of the part marked as SKU 97780474. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.