How to replace the brake master cylinder (Vacuum Boost) on Chevrolet Silverado 3500?

To remove the Brake Master Cylinder (Vacuum Boost), you need to first apply the park brake and block the wheels. Remove the electrical connector of the Brake Fluid Level Sensor and braking pipes from the master cylinder. Screw a rubber cap or plug to the brake pipe fitting ends where they are exposed so that brake fluid does not leak out and so that the brake pipe is sealed. Dispose of the master cylinder nuts and remove it away from the vehicle along with the master cylinder reservoir being removed. For installation, begin by wrapping the master cylinders reservoir before bench bleeding the master cylinder and reinstall it back in the vehicle. Mount the arms on the master cylinder, and tighten the master cylinder mounting nuts to 33 nm (24 ft. Lbs.). Pry or pull the rubber cap or plug off the exposed brake pipe fitting ends, hook up the brake pipes on the respective units, and tighten the brake fittings to 25 nm (18 ft. Lbs.). Return the electrical connector back to the Brake Fluid Level Sensor, bleed hydraulic brake system, lastly releasing the park brake and unblocking the wheels.

OEM Chevrolet Silverado 3500 Brake Master Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Brake Master Cylinders found

View related parts
Chevrolet Silverado 3500 Overhaul Kit Part Number: 19209252
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Cylinder Kit, Brake Master Cylinder
- Replaces: 18048541, 18040253
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209250
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18043278, 18048539, 18060790, 18040236
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209249
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18060789, 18048538, 18040252
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209239
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18047527
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Overhaul Kit Part Number: 19209251
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Cylinder Kit, Brake Master Cylinder
- Replaces: 18048540, 18040237
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2002 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209234
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 18047512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209199
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 15269947, 18047540
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 19209191
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Replaces: 15183822
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Master Cylinder Part Number: 18047524
Product Specifications
- Other Name: Cylinder, Brake Master Cylinder; Brake Master Cylinder
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003 Chevrolet Silverado 3500 | Base, LS, LT | 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Brake Master Cylinder

Want to cut long-term maintenance and repair costs? Choose OEM Brake Master Cylinder. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 3500 Brake Master Cylinder includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 3500 Brake Master Cylinder Parts Questions & Experts Answers

Master Cylinder
19209239
Q: How to replace the brake master cylinder (Vacuum Boost) on Chevrolet Silverado 3500?
A:
To remove the Brake Master Cylinder (Vacuum Boost), you need to first apply the park brake and block the wheels. Remove the electrical connector of the Brake Fluid Level Sensor and braking pipes from the master cylinder. Screw a rubber cap or plug to the brake pipe fitting ends where they are exposed so that brake fluid does not leak out and so that the brake pipe is sealed. Dispose of the master cylinder nuts and remove it away from the vehicle along with the master cylinder reservoir being removed. For installation, begin by wrapping the master cylinders reservoir before bench bleeding the master cylinder and reinstall it back in the vehicle. Mount the arms on the master cylinder, and tighten the master cylinder mounting nuts to 33 nm (24 ft. Lbs.). Pry or pull the rubber cap or plug off the exposed brake pipe fitting ends, hook up the brake pipes on the respective units, and tighten the brake fittings to 25 nm (18 ft. Lbs.). Return the electrical connector back to the Brake Fluid Level Sensor, bleed hydraulic brake system, lastly releasing the park brake and unblocking the wheels.