Make sure this part fits

GM 19209251
Overhaul Kit

1999-2002 GM

Customer Questions & Expert Answers (12)
GM 19209251 Overhaul Kit
  • Part Description
    Cylinder, Brake Master Cylinder
  • Replaces
    18048540, 18040237
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002 Chevrolet Avalanche 1500Base, North Face, On Road Edition, Z718 Cyl 5.3 L GAS
    2002 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    1999-2002 Chevrolet Silverado 1500Base, LS, LT, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2001-2002 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    1999-2002 Chevrolet Silverado 2500Base, LS, LT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2002 Chevrolet Silverado 2500 HDBase, LS, LT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2002 Chevrolet Silverado 3500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2000-2002 Chevrolet Suburban 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19209251 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19209251 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to service and repair the brake master cylinder with vacuum boost for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Apply the park brake and block the wheels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    How do you remove the primary piston assembly for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Take it out from the master cylinder body.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done after installing the master cylinder for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the pipe caps and connect the brake pipes, tightening the fittings to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the next step after disconnecting the brake pipes for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the master cylinder mounting nuts and then the master cylinder itself, followed by the master cylinder reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step in the process for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Reconnect the electrical connection at the brake fluid level sensor, bleed the brakes, and finally release the parking brake.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be done after disconnecting the electrical connection for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disconnect the brake pipes and plug them to prevent brake fluid loss or contamination.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the final step after reconnecting everything for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Bleed the hydraulic brake system, release the park brake, and unblock the wheels.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be inspected after removing the cap and diaphragm for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Inspect these components for cuts, cracks, nicks, or deformation, replacing any affected parts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be used to lubricate the components for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Delco Supreme 110 (GM P/N 12377967) or equivalent DOT-3 brake fluid from a clean, sealed container.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What should be removed after securing the master cylinder for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the master cylinder reservoir cap and diaphragm.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    Q:
    What is the torque specification for tightening the master cylinder mounting nuts for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Tighten the master cylinder mounting nuts to 36 Nm (27 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Brake Master Cylinder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Overhaul Kit 19209251 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19209251 Overhaul Kit is available in the market under the name GM Brake Master Cylinder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19209251 Overhaul Kit fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade EXT models.
The original GM component designated by manufacturer part number 19209251 maintains top performance when functioning as the Cylinder, Brake Master Cylinder unit. The component 19209251 is constructed from durable material and its dimensions span 4.6 x 2.3 x 0.9 inches while weighing 0.60 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Cylinder Kit, Brake Master Cylinder. The part 19209251 has available replacement options 18048540, 18040237. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.