How to replace the Power Steering Hose on a parallel hybrid truck on Chevrolet Silverado 3500?

To replace the Power Steering Cooler pipe/hose on parallel hybrid truck, first disconnect the energy storage box and put a drain pan under the vehicle. Drain the fluid from the reservoir to avoid unnecessary spillage. Delete the clamp holding the Power Steering Cooler inlet hose to the power steering gear, as well as the clamp holding the Power Steering Cooler outlet hose to the Power Steering Pump. Then, remove the bolts that fixing the Power Steering Cooler to the radiator support, and remove the cooler from the vehicle. For installation, install the Power Steering Cooler back on the radiator support and bolt down using 5 nm (44 inch lbs). Next, attach the Power Steering Cooler outlet hose to the Power Steering Pump and install the retaining clamp. Connect the power steering inlet hose at power steering gear and fasten using retention clamp. Reserve and bleed the power steering system, check all hose connectors to find any leaks, install the front grille back, and finally restore the energy storage box after servicing.

OEM Chevrolet Silverado 3500 Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
Chevrolet Silverado 3500 Power Steering Pressure Hose Part Number: 15774514
$71.92 MSRP: $123.54
You Save: $51.62 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Hydraulic Steering Gear Pressure; Power Steering Hose; Pressure Hose
- Replaces: 26051184
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Power Steering Pressure Hose Part Number: 15295841
$81.50 MSRP: $138.75
You Save: $57.25 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hose, Hydraulic Steering Gear Pressure
- Replaces: 15062625
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Power Steering Pressure Hose Part Number: 15295838
$49.97 MSRP: $85.81
You Save: $35.84 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Power Steering Hose; Pressure Hose; Hoses; Hose, Hydraulic Steering Gear Pressure
- Replaces: 26051189
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2004 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Power Steering Pressure Hose Part Number: 26071669
$65.73 MSRP: $112.88
You Save: $47.15 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Power Steering Gear Inlet; Pressure Hose
- Replaced by: 15295840
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
View related parts
Chevrolet Silverado 3500 Power Steering Return Hose Part Number: 15066553
$41.31 MSRP: $70.33
You Save: $29.02 (42%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Return Hose
- Replaced by: 19540414
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.6 L DIESEL
View related parts
Chevrolet Silverado 3500 Power Steering Return Hose Part Number: 26107356
Product Specifications
- Other Name: Hose, Steering Fluid Cooler; Power Steering Hose; Inlet Hose; Outlet Pipe; Return Line; Return Hose
- Replaces: 26051176
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chevrolet Silverado 3500 | Base, LS, LT, WT | 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS

Chevrolet Silverado 3500 Power Steering Hose

Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 3500 Power Steering Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 3500 Power Steering Hose Parts and Q&A

Power Steering Pressure Hose
15295841
Q: How to replace the Power Steering Hose on a parallel hybrid truck on Chevrolet Silverado 3500?
A:
To replace the Power Steering Cooler pipe/hose on parallel hybrid truck, first disconnect the energy storage box and put a drain pan under the vehicle. Drain the fluid from the reservoir to avoid unnecessary spillage. Delete the clamp holding the Power Steering Cooler inlet hose to the power steering gear, as well as the clamp holding the Power Steering Cooler outlet hose to the Power Steering Pump. Then, remove the bolts that fixing the Power Steering Cooler to the radiator support, and remove the cooler from the vehicle. For installation, install the Power Steering Cooler back on the radiator support and bolt down using 5 nm (44 inch lbs). Next, attach the Power Steering Cooler outlet hose to the Power Steering Pump and install the retaining clamp. Connect the power steering inlet hose at power steering gear and fasten using retention clamp. Reserve and bleed the power steering system, check all hose connectors to find any leaks, install the front grille back, and finally restore the energy storage box after servicing.