OEM Chevrolet Silverado 3500 Steering Angle Sensor

Chevrolet Silverado 3500 Steering Angle Sensor Parts Questions & Experts Answers

• Position Sensor
  26104070
  Q: How to center the Steering Angle Sensor on Chevrolet Silverado 3500?

  A: A technician can identify the steering angle sensor type by reviewing mentioned illustrations. The sensor connector has its FRONT section stored to the right side when viewing directions from a technician's position. The sensor connector needs removal before proceeding with the operation. It's not necessary to perform centering operations before removing the existing sensor when planning sensor reuse. Extract the sensor body from its adapter connection to the bearing assembly. During sensor installation check for a foam ring located on the FRONT side of the sensor next to a pin hole that facilitates centering while ensuring a smooth rotor flange cuff fit. Place a strategic alignment mark on the flush rotor flange cuff during sensor removal in order to prevent incorrect positioning for the reinstallation procedure. A raised rotor flange cuff appears on the sensor's FRONT side along with a pin hole and an alignment mark. Install the sensor by positioning it against the steering shaft then connecting it to the adapter and bearing assembly. The sensor includes a pin which must remain in place unless it's a fresh sensor installation. When installing the sensor make sure to keep the pin in place until the sensor is fully seated. Installation requires proper alignment of the marks found on the flush rotor flange cuff. Double D flat features and a foam ring exist on the BACK section of the sensor for successful mounting. Repetitions should be done for all sensors while keeping track of unique features together with matching requirements for proper installation.