Make sure this part fits

GM 26107356
Power Steering Return Hose

1999-2009 GM

Customer Questions & Expert Answers (30)
GM 26107356 Power Steering Return Hose
GM 26107356 Power Steering Return Hose
  • Part Description
    Hose, Steering Fluid Cooler; Power Steering Hose
  • Replaces
    26051176
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2005 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2006 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Can you help me check if this 26107356 is the right part for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 26107356 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you install the new power steering gear inlet hose for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Install it to the power steering pump and then to the power steering gear, ensuring to tighten the fittings to 28 N.m (20 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you install the power steering cooler for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Position the power steering cooler back into place and tighten the retaining bolts to 5 N.m (44 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the new hose be routed for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Route the new hose in the same position as the original.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after removing the clamps for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove the bolts that retain the power steering cooler from the radiator support and take the power steering cooler out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be attached to the power steering pump for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Attach the power steering gear outlet hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the new hose be installed for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Route the hose in the same position it occupied prior to removal and install the power steering gear inlet hose to the brake booster and then to the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering cooler pipe/hose without hydroboost for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by removing the front grille.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How can excess fluid spillage be prevented for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Siphon the fluid from the reservoir.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after attaching the new hose to the power steering pump for the 2003 Chevrolet Suburban 1500? Posted by Customer
    A:
    Position the clamp at the end of the hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you secure the power steering inlet hose for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Attach the power steering inlet hose to the power steering gear and secure it with the retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be detached after the power brake booster outlet hose for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Detach the power brake booster inlet hose from the brake booster and the power steering gear inlet hose from the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the first step to replace the power steering gear inlet pipe/hose in a rack and pinion system for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    First, remove the power steering inlet hose from the power steering pump and then from the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should you do after attaching the hoses for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Tighten the hose connections to 28 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after routing the hose for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Install the power steering gear inlet hose to the brake booster.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be attached to the power steering pump during installation for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Attach the power steering gear outlet hose to the power steering pump, ensuring the clamp is positioned at the end of the hose.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How do you begin the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Connect the power steering cooler outlet hose to the power steering pump, ensuring to follow the fastener notice in service precautions.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the new hose be routed during installation for the 2002 Chevrolet Tahoe? Posted by Customer
    A:
    Route the new hose in the same position as the original.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the hose to the power steering pump for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Install the power steering gear inlet hose to the power steering gear, ensuring to tighten the fittings to 28 Nm (20 ft. lbs.).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the new hose be installed for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Route the hose in the same position it occupied prior to removal and install it to the power steering pump and then to the power steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after installing the power steering cooler for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Connect the power steering outlet hose to the power steering gear and install the retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    How should the hose be positioned during installation for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Ensure the hose is routed in the same position as before removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be removed from the steering gear for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the power steering gear outlet hose from the steering gear.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after the installation is complete for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the drain pan from under the vehicle and proceed to bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after connecting the outlet hose for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Connect the power steering inlet hose to the power steering gear and install the retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after installing the power steering cooler for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the power steering cooler outlet hose to the power steering pump and secure it with the retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What clamps need to be removed during the process for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the clamp retaining the power steering cooler inlet hose to the power steering gear and the clamp retaining the power steering cooler outlet hose to the power steering pump.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What should be done after tightening the fittings for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the drain pan from under the vehicle and bleed the power steering system.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after installing the power steering cooler for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Connect the power steering inlet hose to the power steering pump and secure it with the retaining clamp.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    Q:
    What is the next step after removing the hose for the 2005 GMC Yukon? Posted by Customer
    A:
    Take the hose out of the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Power Steering Hose
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Power Steering Return Hose 26107356 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 26107356 Power Steering Return Hose is available in the market under the name GM Hydraulic Hose, Power Steering Hose. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 26107356 Power Steering Return Hose fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Hummer H2 models.
The original GM component designated by manufacturer part number 26107356 maintains top performance when functioning as the Hose, Steering Fluid Cooler; Power Steering Hose unit. The component 26107356 is constructed from durable material and its dimensions span 8.2 x 2.1 x 13.5 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Inlet Hose; Outlet Pipe; Return Line; Return Hose. The part 26107356 has available replacement options 26051176. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.