OEM Chevrolet SSR Flywheel

Chevrolet SSR Flywheel Parts Questions & Experts Answers

• Drive Plate
  12654640
  Q: How to replace the engine flywheel on Chevrolet SSR?

  A: The first step to replace the engine Flywheel involves removing the automatic transmission while recording the Flywheel position and its direction before extraction. Break the first step by turning out the bolts securing the engine Flywheel before removing it. A detailed check for dirt and damages should be performed on the engine Flywheel. During the Flywheel Crankshaft mounting process keep in mind that it lacks a locating pin to ensure proper alignment because it will slide onto the Crankshaft by the engine Flywheel bolt force before achieving Crankshaft flange or spacer mating. Longer engine Flywheel bolts should be utilized while working with Flywheel spacers. Properties of threadlock gm p/n 12345382 (Canadian P/N 10953489) or alternative should be applied to Flywheel bolt threads. You must install engine Flywheel bolts following this procedure: start by tightening the bolts to 20 nm (15 ft. Lbs.), then move to 50 nm (37 ft. Lbs.), and finish by tightening to 100 nm (74 ft. Lbs.). Put the automatic transmission back into its original position right after establishing the Flywheel.