How to replace the radiator hose outlet on Chevrolet SSR?

The first step to replace the Radiator outlet hose starts with draining the cooling system followed by removing the air cleaner assembly. The hose clamp pliers (J 38185) should be used to release the Radiator outlet hose clamp tension at the Thermostat Housing before disconnecting the hose from the housing. The hose clamp pliers (J 38185) should be used to loosen the Radiator outlet hose clamp at the Thermostat Housing then disconnect the hose from the thermostat. Next raise and support the vehicle before readjusting the clamp tension at the Radiator outlet hose on the Radiator for hose removal. Disembark the Radiator outlet hose from its location. Install the Radiator outlet hose by properly matching the reference marks on the hoses and the Radiator to avoid damaging the fitting points. Clean coolant should be applied internally to the hose diameters before positioning the Radiator outlet hose into its place. Attach the Radiator outlet hose to the Radiator before tightening its clamp at the Radiator position. Install the Radiator outlet hose to the Thermostat Housing while maintaining tension on the clamp at the Thermostat Housing. Perform a final step by installing the air cleaner assembly followed by cooling system fill-up.

OEM Chevrolet SSR Radiator Hose

Radiator Hose Tube

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Radiator Hoses found

View related parts
Chevrolet SSR Lower Hose Part Number: 15128705
Product Specifications
- Other Name: Hose, Radiator Outlet (Lower); Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Chevrolet SSR Upper Hose Part Number: 15106778
Product Specifications
- Other Name: Hose, Radiator Inlet (Upper); Multi Purpose Hose; Radiator Hose; Cooling Hose
- Position: Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet SSR | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

Chevrolet SSR Radiator Hose

Want to cut long-term maintenance and repair costs? Choose OEM Radiator Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet SSR parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet SSR Radiator Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet SSR Radiator Hose is a essential part that proves the dependability and power of Chevrolet SSR cars that were manufactured in 2003-2006. Located above and below the carburetor, this Dual Radiator Hose Group is a terribly important part of the automobile's cooling system because it brings water from the water pump directly to the heater. Through the proper flow of a coolant, the Chevrolet SSR Radiator Hose reduces chances of the vehicle getting too hot, thus improving its performance and safety. They come in different designs that can work with different SSR Models like the powerful 5.3L Vortec 5300 V8 and the advanced 6.0L LS2 V8; this Radiator Hose is Manufactured with high-quality and designed to handle High End power. Chevrolet SSR has a new look, based on the design of trucks of the past, while the practicality of the vehicle is backed up with the quality of the Radiator Hose. Characteristic for the Chevrolet SSR Radiator Hose is the high end manufacturing, durability and stability in service, which makes it stand out from the competitors in the automotive industry. Since this Chevrolet SSR Radiator Hose is such an integral part of ensuring the proper health and performance of the engine it is no mere component part; it is evidence of Chevrolet Inc's devotion to quality and the happiness inherent in superior engineering. From driving along city roads or highways the Chevrolet SSR Radiator Hose plays a very vital role in any driving giving clients the prime experience ever.

Chevrolet SSR Radiator Hose Parts Questions & Experts Answers

Upper Hose
15106778
Q: How to replace the radiator hose outlet on Chevrolet SSR?
A:
The first step to replace the Radiator outlet hose starts with draining the cooling system followed by removing the air cleaner assembly. The hose clamp pliers (J 38185) should be used to release the Radiator outlet hose clamp tension at the Thermostat Housing before disconnecting the hose from the housing. The hose clamp pliers (J 38185) should be used to loosen the Radiator outlet hose clamp at the Thermostat Housing then disconnect the hose from the thermostat. Next raise and support the vehicle before readjusting the clamp tension at the Radiator outlet hose on the Radiator for hose removal. Disembark the Radiator outlet hose from its location. Install the Radiator outlet hose by properly matching the reference marks on the hoses and the Radiator to avoid damaging the fitting points. Clean coolant should be applied internally to the hose diameters before positioning the Radiator outlet hose into its place. Attach the Radiator outlet hose to the Radiator before tightening its clamp at the Radiator position. Install the Radiator outlet hose to the Thermostat Housing while maintaining tension on the clamp at the Thermostat Housing. Perform a final step by installing the air cleaner assembly followed by cooling system fill-up.