OEM Chevrolet Suburban 2500 Fuse Box

Chevrolet Suburban 2500 Fuse Box Parts Questions & Experts Answers

• Junction Block
  12193645
  Q: How to service and repair the Fuse Box on the right side on Chevrolet Suburban 2500?

  A: Service and repair of the right side Fuse Box requires first disconnecting all negative Battery Cables and subsequent removal of the right side end panel. The wiring connectors on the instrument panel junction block need detachment from their front position followed by unfastening the harness from its fastener. To remove the ip wiring harness junction block users need to push both clips while pulling the unit backward and disconnect the lower ip light bulb by counterclockwise rotation followed by rearward extraction. The ip wiring harness junction block should be passed through the ip hole after all wiring connectors on the block's rear are detached from the vehicle. The installation process requires connecting wiring connectors to the junction block and passing it through the available hole in the ip. To insert the lower ip light bulb thread the bulb socket clockwise and simultaneously push inward before connecting the ip wiring harness junction block to the ip through squeezing both sealing clips. The workflow ends with installation of the right side end panel and reconnecting negative battery cables while you secure the wiring connector to the ip wiring harness junction block and fasten the harness to its place.