Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser; Condenser, A/C Condenser
Replaced by: 85145960
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 Chevrolet Tahoe | LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Chevrolet Tahoe A/C Condenser
Our website offers an extensive catalog of genuine Chevrolet Tahoe A/C Condenser at unbeatable prices. Every OEM Chevrolet Tahoe A/C Condenser comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe A/C Condenser Parts Questions & Experts Answers
Q: How to replace the A/C Condenser in an engine on Chevrolet Tahoe?
A: Engine coolant drainage comes first before starting the replacement of the condenser. Follow these steps to replace the condenser - first detach the electrical connector from the air inlet duct then remove the pcv hose from the air cleaner and finally remove the air inlet assembly. After disconnecting the upper Radiator Hose and upper Fan Shroud and lower Radiator Hose, move the lower Fan Shroud to the side to make Radiator removal possible. First recover all refrigerant from your system followed by removing the Radiator. First disconnect the compressor discharge hose assembly from the condenser and then separate the discharge hose and evaporator tube. Before you remove the condenser you must first disassemble the insulator retainers and upper insulator retainers and their bolts. The new condenser must be placed in position then upper insulator retainers and insulator retainer bolts should be installed before applying torque to 2.4 n.m (21 lb in). Attach the evaporator tube to the condenser then connect the discharge hose and compressor discharge hose assembly. Install the Radiator before you replace the lower Radiator Hose and upper Fan Shroud and upper Radiator Hose. First install the air inlet assembly followed by connecting the pcv hose to the air cleaner and reattaching the electrical connector to the air inlet duct. Complete engine coolant service then proceed with system refrigerant addition. The j 39400-a must be used to check for leaks at all fittings which were repaired or reinstalled.