Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1998-2000 Chevrolet Tahoe | Base, Limited, LS, LT, Z71 | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
Chevrolet Tahoe Door Striker
Our website offers an extensive catalog of genuine Chevrolet Tahoe Door Striker at unbeatable prices. Every OEM Chevrolet Tahoe Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe Door Striker Parts Questions & Experts Answers
Q: How to replace the front door striker on Chevrolet Tahoe?
A: The procedure to replace the front door striker starts by taking out the lower striker bolt then loosening the upper bolt just enough for rotating both parts away from the lower bolt hole. Install the lower striker bolt until it achieves sufficient tightness which keeps the striker backing plate stable. After removing the striker bolt at the upper position you should next take out the spacer (if present) and finally remove the striker. The first step of installation involves installing the striker then its spacer if it has one along with the upper striker bolt. You should remove the lower striker bolt when the upper threaded hole needs re-alignment to the proper position. Before installing the lower threaded hole in the striker backing plate you should rotate both the striker and the spacer (if equipped). Users need to exercise careful protection when dealing with fasteners. The termination of striking bolt installation requires a final torque of 24 Nm (18 lb ft).