Make sure this part fits

GM 15717849
Striker

2000-2004 GM

Customer Questions & Expert Answers (17)
GM 15717849 Striker
  • Part Description
    Striker, Door Lock Striker
  • Position
    Rear
  • Replaced By
    15182586
  • Manufacturer
    General Motors
Make sure this part fits
$4.85 MSRP: $7.60
You Save: $2.75 (37%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2004 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2004 Chevrolet Avalanche 1500Base, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L GAS
    2002-2004 Chevrolet Avalanche 2500Base8 Cyl 8.1 L GAS
    2000-2004 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2001-2003 Chevrolet Silverado 1500 HDLS, LT8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500 HDBase, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    2001-2004 Chevrolet Silverado 3500Base, LS, LT, WT8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL, 8 Cyl 8.1 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15717849 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15717849 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the striker screws be secured for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Tighten the striker screws to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the body-mounted rear door striker for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove the upper garnish trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after loosening the upper striker bolt for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the lower striker bolt and tighten it sufficiently to hold the striker backing plate in place before removing the upper striker bolt and the spacer, if equipped.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after removing the striker screws for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Take out the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after reinstalling the lower striker bolt for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the upper striker bolt, followed by the spacer if it is present, and then take out the striker.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step after installing the new upper door striker for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Close the door and check for proper operation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after removing the upper door striker for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the new upper door striker and ensure to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How do you install the new upper door striker for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Position the upper door striker back onto the vehicle and install the retaining bolts.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the installation process for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Install the retaining bolts and tighten them to 20 N.m (15 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What should be done after removing the lower door striker bolts for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Take out the lower door striker from the vehicle.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step after installing the upper door striker for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Install the upper door striker bolts, tightening them to 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the next step for installation for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Position the lower door striker back onto the vehicle and ensure to follow the Fastener Notice.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the first step to replace the body-mounted rear door striker for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Remove the upper garnish trim panel.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the striker be secured for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Secure it with the striker screws, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    What is the final step in the replacement process for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Tighten the lower door striker bolts to 24 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    Q:
    How should the striker screws be secured for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Tighten the striker screws to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Striker
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Striker 15717849 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15717849 Striker is available in the market under the name GM Door Striker. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15717849 Striker fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 15717849 maintains top performance when functioning as the Striker, Door Lock Striker unit at its Rear. The component 15717849 is constructed from durable material and its dimensions span 3.3 x 2.2 x 1.9 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15717849 has available replacement options listed under 15182586. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.