Make sure this part fits

GM 12477827
Lower Hinge, Driver Side

2000-2004 GM

Customer Questions & Expert Answers (11)
GM 12477827 Lower Hinge, Driver Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Driver Side
  • Manufacturer
    General Motors
Make sure this part fits
$12.53 MSRP: $130.36
You Save: $117.83 (91%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2004 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2004 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2000-2004 Chevrolet Suburban 1500Base, LS, LT, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2004 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2000-2004 GMC YukonDenali, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 1500Denali, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2004 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12477827 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12477827 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the next step after drilling the pilot holes for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Drill an 11.5 mm (29/64 in) hole at the pilot locations for the studs.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing each stud for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Draw the stud tight through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What size pilot hole should be drilled at each center punch location for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    A 3 mm (1/8 in) pilot hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the panels for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Eliminate any excess sealer around the existing hinge and mark its location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you position the service hinge for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Position the service hinge within the scribe marks and center punch each stud location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you prepare the existing hinge for removal for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper to locate the 4 welds attaching the hinge to the door, ensuring to punch the center of each weld to facilitate removal during drilling.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the hinge after drilling for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the hinge, using a chisel if necessary, and clean the door surface for a flush fit for the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after locating the welds for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Punch the center of each weld to facilitate drilling.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done before reinstalling and aligning all related panels and components for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Clean and prepare all surfaces as necessary for refinishing, apply sealers, and refinish surfaces as needed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the studs for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Feed fish wire through the hinge and out of the conduit hole in the pillar, install the stud into the wire end, and pull it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lower Hinge, Driver Side 12477827 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12477827 Lower Hinge, Driver Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12477827 Lower Hinge, Driver Side fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 12477827 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Driver Side. The component 12477827 is constructed from durable material and its dimensions span 6.9 x 4.5 x 4.5 inches while weighing 3.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge; Door Hinge. The part 12477827 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.