How to Replace a Rear Door Hinge on GMC Yukon XL 1500?

The process of replacing a rear door hinge requires complete removal of surrounding components alongside the elimination of unnecessary sealer before making permanent marks on the hinge pillar. Lightly sand with 100 grit or finer sandpaper the existing hinge to find its four welds that connect it to the pillar while making proper holes at the weld centers for drilling purposes. Start by drilling 13 mm (1/2 in) rotabroach hole saws into locations marked for each punch on the hinge before breaking it free from the pillar with a chisel if needed. Thoroughly clean the pillar surface until it achieves a flat adequate fit for the new service hinge. First repair damaged areas of the pillar before installing the service hinge within the marked area while using the punch marks to drill holes for studs. Drill a 3 mm (1/8 in) pilot hole following each center punch position before creating a 11.5 mm (29/64 in) hole to accommodate the studs. All exposed metal parts need cleaning before applying an authorized corrosion-resistant primer. Feed fish wire, GM P/N 15017229, through the hinge, the hinge stud hole, and out of the conduit hole in the pillar. Use the stud GM P/N 15017230 by inserting it into the wire end and pull it toward position while keeping the hinge in place with your hand and carefully removing the fish wire. Use supplied nuts GM P/N 11516746 to secure the stud through each pillar before completing other locations. Before installing the hinge onto the pillar each service nut must be removed and full-bodied caulk should be added to the mounting surfaces so that you can secure the hinge using the provided nuts. The process includes sealing the surface areas before finishing while tightening hinge nuts to 25 N.m (18 lb ft). You should also prepare surfaces for refinishing and install all components and panels with proper alignment.

How to replace the front side door hinge on the body side on GMC Yukon XL 1500?

Begin the front side door hinge body side replacement by first removing every adjacent component before cutting off unnecessary sealer and marking the hinge pillar where the hinge will be mounted. You should apply 100 grit or finer sandpaper along with your hand to sand the existing hinge until you find all four weld points that connect it to the pillar while punching the middle of each weld for easier drilling. First, mark the center of each weld on the original hinge but do not drill into the hinge pillar. Afterward, use a 13 mm (1/2 in) rotabroach hole saw or equivalent to drill holes only through the hinge base into the punch marks. The service hinge requires complete removal while you use a chisel to uncover the pillar surface until it lies evenly with the service hinge. The pillar should receive repairs after drilling and hinge removal before placing the service hinge inside the scribe marks while simultaneously punching centers at each stud position on the pillar. Set the drill at exact size to make a 3 mm (1/8 in) pilot hole at center punch locations before creating an 11.5 mm (29/64 in) hole for the studs at their pilot points. All exposed metal surfaces need cleaning as well as preparation for anti-corrosion primer application before inserting fish wire (GM P/N 15017229) into the hinge and through the conduit hole of the pillar. Install stud (GM P/N 15017230) into the wire end and pull it into position with the hinge while the fish wire remains in the wire end. Install one more pillar stud a single time by feeding the providednuts (GM P/N 11516746) through the pillar after fitting the stud at its designated locations. Fully apply full-bodied caulk over the complete hinge mounting surfaces before securing each service nut. Use the supplied nuts to mount the hinge onto the pillar before torquing the nuts to 25N.m (18 lb ft). The technician will clean all required surfaces for refinishing work before applying sealants and subsequently repairing or repainting these surfaces as needed before aligning and installing all relative parts.

OEM GMC Yukon XL 1500 Door Hinge

Interior Door Hinge

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Door Hinges found

View related parts
GMC Yukon XL 1500 Lower Hinge, Front Part Number: 19354132
$164.44 MSRP: $245.85
You Save: $81.41 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Front Side Door (Body Side); Door Hinge; Upper Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Front
- Replaces: 12476447, 12477887, 12472841
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Front Passenger Side Part Number: 20969646
$135.34 MSRP: $202.34
You Save: $67.00 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Door Hinge
- Position: Front Lower Passenger Side
- Replaces: 15877406, 20876297, 25958197, 25854411
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Rear Driver Side Part Number: 20876300
$80.83 MSRP: $120.31
You Save: $39.48 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Side Door Lower Hinge; Door Hinge; Hinge, Door Hinge
- Position: Rear Lower Driver Side
- Replaces: 25854393, 25958200
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Rear Passenger Side Part Number: 25854398
$70.74 MSRP: $105.29
You Save: $34.55 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Rear Side Door Upper; Door Hinge; Hinge, Door Hinge
- Position: Rear Upper Passenger Side
- Replaces: 15791377
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Front Driver Side Part Number: 20969645
$121.75 MSRP: $182.02
You Save: $60.27 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Front Door Lower Hinge; Door Hinge; Hinge, Door Hinge
- Position: Front Lower Driver Side
- Replaces: 15877405, 25958196, 20876296, 25854410
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Driver Side Part Number: 12472843
$64.29 MSRP: $92.79
You Save: $28.50 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Upper Hinge; Hinge; Door Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Rear Passenger Side Part Number: 20876301
$80.83 MSRP: $120.31
You Save: $39.48 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge, Rear Side Door Lower Hinge; Door Hinge; Hinge, Door Hinge
- Position: Rear Lower Passenger Side
- Replaces: 25958201, 25854394, 15791375
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Rear Driver Side Part Number: 25854397
$82.91 MSRP: $123.41
You Save: $40.50 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Rear Side Door Upper; Door Hinge; Hinge, Door Hinge
- Position: Rear Upper Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Front Passenger Side Part Number: 25854416
$114.86 MSRP: $171.72
You Save: $56.86 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Door Hinge
- Position: Front Upper Passenger Side
- Replaces: 15877429
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Front Driver Side Part Number: 25854415
$113.33 MSRP: $169.43
You Save: $56.10 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Assembly-Front Side Door Upper; Door Hinge; Hinge, Door Hinge
- Position: Front Upper Driver Side
- Replaces: 15877428
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Hinge Assembly, Rear Driver Side Part Number: 19354130
$159.94 MSRP: $239.11
You Save: $79.17 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Rear Side Door (Body Side); Door Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Rear Driver Side
- Replaces: 12476449
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Passenger Side Part Number: 12472844
$93.05 MSRP: $179.03
You Save: $85.98 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Lower Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Front Part Number: 19354133
$168.88 MSRP: $252.48
You Save: $83.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Front Side Door (Body Side); Door Hinge; Upper Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Front
- Replaces: 12476448, 12477888, 12472842
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hinge Assembly, Passenger Side Part Number: 12476452
$222.71 MSRP: $332.97
You Save: $110.26 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Lower Hinge, Driver Side Part Number: 12477499
$55.15 MSRP: $105.20
You Save: $50.05 (48%)
ADD TO CART
Product Specifications
- Other Name: Hinge, Door Hinge; Hinge; Door Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hinge Part Number: 15134524
Product Specifications
- Other Name: Hinge, End Gate Closing; Liftgate Hinge; Door Hinge
- Replaces: 15767489, 15762178
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hinge Assembly, Rear Passenger Side Part Number: 19354131
$183.76 MSRP: $274.74
You Save: $90.98 (34%)
Product Specifications
- Other Name: Hinge Kit, Rear Side Door (Body Side); Door Hinge; Hinge; Hinge Kit, Door Hinge
- Position: Rear Passenger Side
- Replaces: 12476450
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hinge Assembly, Driver Side Part Number: 12476451
$160.60 MSRP: $240.11
You Save: $79.51 (34%)
Product Specifications
- Other Name: Hinge Kit, Door Hinge; Hinge; Door Hinge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2006 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
GMC Yukon XL 1500 Hinge Part Number: 15875510
$52.18 MSRP: $77.67
You Save: $25.49 (33%)
Product Specifications
- Other Name: Liftgate Hinge; Door Hinge; Hinge, End Gate Closing
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
GMC Yukon XL 1500 Upper Hinge, Passenger Side Part Number: 12477498
Product Specifications
- Other Name: Hinge, Door Hinge; Hinge; Door Hinge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

GMC Yukon XL 1500 Door Hinge

Want to cut long-term maintenance and repair costs? Choose OEM Door Hinge. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon XL 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon XL 1500 Door Hinge includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Yukon XL 1500 Door Hinge Parts and Q&A

Lower Hinge, Driver Side
12472843
Q: How to Replace a Rear Door Hinge on GMC Yukon XL 1500?
A:
The process of replacing a rear door hinge requires complete removal of surrounding components alongside the elimination of unnecessary sealer before making permanent marks on the hinge pillar. Lightly sand with 100 grit or finer sandpaper the existing hinge to find its four welds that connect it to the pillar while making proper holes at the weld centers for drilling purposes. Start by drilling 13 mm (1/2 in) rotabroach hole saws into locations marked for each punch on the hinge before breaking it free from the pillar with a chisel if needed. Thoroughly clean the pillar surface until it achieves a flat adequate fit for the new service hinge. First repair damaged areas of the pillar before installing the service hinge within the marked area while using the punch marks to drill holes for studs. Drill a 3 mm (1/8 in) pilot hole following each center punch position before creating a 11.5 mm (29/64 in) hole to accommodate the studs. All exposed metal parts need cleaning before applying an authorized corrosion-resistant primer. Feed fish wire, GM P/N 15017229, through the hinge, the hinge stud hole, and out of the conduit hole in the pillar. Use the stud GM P/N 15017230 by inserting it into the wire end and pull it toward position while keeping the hinge in place with your hand and carefully removing the fish wire. Use supplied nuts GM P/N 11516746 to secure the stud through each pillar before completing other locations. Before installing the hinge onto the pillar each service nut must be removed and full-bodied caulk should be added to the mounting surfaces so that you can secure the hinge using the provided nuts. The process includes sealing the surface areas before finishing while tightening hinge nuts to 25 N.m (18 lb ft). You should also prepare surfaces for refinishing and install all components and panels with proper alignment.
Lower Hinge, Front
19354132
Q: How to replace the front side door hinge on the body side on GMC Yukon XL 1500?
A:
Begin the front side door hinge body side replacement by first removing every adjacent component before cutting off unnecessary sealer and marking the hinge pillar where the hinge will be mounted. You should apply 100 grit or finer sandpaper along with your hand to sand the existing hinge until you find all four weld points that connect it to the pillar while punching the middle of each weld for easier drilling. First, mark the center of each weld on the original hinge but do not drill into the hinge pillar. Afterward, use a 13 mm (1/2 in) rotabroach hole saw or equivalent to drill holes only through the hinge base into the punch marks. The service hinge requires complete removal while you use a chisel to uncover the pillar surface until it lies evenly with the service hinge. The pillar should receive repairs after drilling and hinge removal before placing the service hinge inside the scribe marks while simultaneously punching centers at each stud position on the pillar. Set the drill at exact size to make a 3 mm (1/8 in) pilot hole at center punch locations before creating an 11.5 mm (29/64 in) hole for the studs at their pilot points. All exposed metal surfaces need cleaning as well as preparation for anti-corrosion primer application before inserting fish wire (GM P/N 15017229) into the hinge and through the conduit hole of the pillar. Install stud (GM P/N 15017230) into the wire end and pull it into position with the hinge while the fish wire remains in the wire end. Install one more pillar stud a single time by feeding the providednuts (GM P/N 11516746) through the pillar after fitting the stud at its designated locations. Fully apply full-bodied caulk over the complete hinge mounting surfaces before securing each service nut. Use the supplied nuts to mount the hinge onto the pillar before torquing the nuts to 25N.m (18 lb ft). The technician will clean all required surfaces for refinishing work before applying sealants and subsequently repairing or repainting these surfaces as needed before aligning and installing all relative parts.