Make sure this part fits

GM 12476452
Hinge Assembly, Passenger Side

2000-2007 GM

Customer Questions & Expert Answers (21)
GM 12476452 Hinge Assembly, Passenger Side
  • Part Description
    Hinge Kit, Door Hinge
  • Position
    Passenger Side
  • Manufacturer
    General Motors
Make sure this part fits
$204.32 MSRP: $305.48
You Save: $101.16 (34%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12476452 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 12476452 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How should the service hinge be positioned for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Position the service hinge within the scribe marks and center punch each stud location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in replacing the rear door hinge on the body side for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Begin by removing all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done with the existing hinge before removal for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Eliminate any excess sealer around the existing hinge and scribe its location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the hinge for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Align the hinge and the backing plate with the holes in the door and install the bolts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear cargo door hinge for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Visually inspect and restore any damage to factory specifications.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the front door hinge for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Begin by removing all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after repeating the process for all stud locations for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Remove each service nut and apply a full-bodied caulk to the hinge mounting surface for a proper seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the hinge for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Clear all remaining weld from the pillar surface for a flush fit of the service hinge and repair any damage to the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What drilling steps are required for the new hinge installation for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole at each center punch location, then drill an 11.5 mm (29/64 in) hole at the pilot locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be applied to all bare metal surfaces for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    An approved anti-corrosion primer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be applied to all bare metal surfaces for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    An approved anti-corrosion primer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the bare metal surfaces for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Clean and prepare all bare metal surfaces, applying approved anti-corrosion primer and a full-bodied caulk to the entire hinge mounting surface for a proper seal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after cleaning the door surface for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Repair any damage, prepare the backing plate mounting surfaces, position the service hinge, center punch hole locations, and drill a 3 mm (1/8 in) pilot hole followed by a 13 mm (1/2 in) hole.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after removing the panels for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Eliminate any excess sealer around the existing hinge and mark its location on the hinge pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the installation process for the hinge and backing plate for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Align the hinge and the backing plate with the holes in the door, install the bolts, and tighten them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to bare metal surfaces before installation for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Clean all bare metal surfaces and apply an approved anti-corrosion primer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done to the pillar after hinge removal for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Repair any damage to the pillar from drilling or hinge removal.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What tool is used to drill through the hinge for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    A 13 mm (1/2 in) rotabroach hole saw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done before refinishing for the 2006 GMC Yukon? Posted by Customer
    A:
    Consult GM4901M-D-2000 for recommended products and avoid combining paint systems, following the paint manufacturer's recommendations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step after removing each service nut for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Apply a full-bodied caulk to the entire hinge mounting surface for a proper seal, then install the hinge to the pillar using the supplied nuts, tightening them to 25 N.m (18 lb ft).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Hinge Assembly, Passenger Side 12476452 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12476452 Hinge Assembly, Passenger Side is available in the market under the name GM Door Hinge. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12476452 Hinge Assembly, Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 12476452 maintains top performance when functioning as the Hinge Kit, Door Hinge unit at its Passenger Side. The component 12476452 is constructed from durable material and its dimensions span 7.4 x 4.1 x 4.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Hinge; Door Hinge. The part 12476452 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.