Make sure this part fits

GM 19354131
Hinge Assembly, Rear Passenger Side

2000-2007 GM

Customer Questions & Expert Answers (21)
GM 19354131 Hinge Assembly, Rear Passenger Side
  • Part Description
    Hinge Kit, Rear Side Door (Body Side); Door Hinge
  • Position
    Rear Passenger Side
  • Replaces
    12476450
  • Manufacturer
    General Motors
Make sure this part fits
$183.76 MSRP: $274.74
You Save: $90.98 (34%)
Currently Unavailable

Due to manufacturer supply shortage, this item isn't currently available for ordering.

  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19354131
    Part DescriptionHinge Kit, Rear Side Door (Body Side); Door Hinge
    Other NamesHinge; Hinge Kit, Door Hinge
    Item Dimensions5.2 x 5.2 x 11.4 inches
    Item Weight2.30 Pounds
    PositionRear Passenger Side
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces12476450
    ManufacturerGeneral Motors
    SKU19354131
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicLS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19354131 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19354131 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What tool is used to drill through the hinge for the 2002 Cadillac Escalade? Posted by Customer
    A:
    A 13 mm (1/2 in) rotabroach hole saw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing each stud for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Draw the stud tight through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Begin by removing all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the final step in the installation process for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Align the hinge and backing plate with the holes in the door, install the bolts, tightening them to 25 N.m (18 lb ft), then apply sealers, refinish the metal surfaces as needed, and reinstall all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the service hinge be positioned for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Within the scribe marks on the pillar.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What are the final steps after installing the hinge for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Clean and prepare surfaces for refinishing, apply sealers, and reinstall all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the process for drilling pilot holes for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Drill a 3 mm (1/8 in) pilot hole at each center punch location, ensuring the drill bit is the exact size, followed by drilling an 11.5 mm (29/64 in) hole at the pilot locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you position the service hinge for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Position the service hinge within the scribe marks on the door and center punch each hole location according to the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How should the existing hinge be prepared for removal for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Lightly hand-sand the existing hinge with 100 grit or finer sandpaper to locate the four welds attaching the hinge to the door, and punch the center of each weld.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be applied to all bare metal surfaces for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    An approved anti-corrosion primer.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What tool is used to drill through the hinge for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    A 13 mm (1/2 in) rotabroach hole saw.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What tool is used to drill through the hinge for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    A 13 mm (1/2 in) rotabroach hole saw or equivalent.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing the hinge to the pillar for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Clean surfaces for refinishing, apply sealers, and reinstall all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you remove the hinge after drilling for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Remove the hinge, using a chisel if necessary, and clean the door surface for a flush fit for the service hinge.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should you do after center punching the weld marks for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Drill through the hinge base at each punch location using a 13 mm (1/2 in) rotabroach hole saw or equivalent, and remove the hinge, using a chisel if necessary to separate it from the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done after installing each stud for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Draw the stud tight through the pillar using the supplied nuts and repeat for the remaining stud locations.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step to replace the rear door hinge for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What should be done with the existing hinge before removal for the 2006 GMC Yukon? Posted by Customer
    A:
    Eliminate any excess sealer around the existing hinge and scribe its location on the door.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    What is the first step in replacing the rear door hinge on the body side for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Begin by removing all related panels and components.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    Q:
    How do you install the studs for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Feed fish wire through the hinge and out of the conduit hole in the pillar, install the stud into the wire end, and pull it into position.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Door Hinge
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19354131, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19354131 Hinge Assembly, Rear Passenger Side. It is sometimes referred to as GM Door Hinge. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19354131 Hinge Assembly, Rear Passenger Side. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery